lkml.org 
[lkml]   [2014]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] arm64: Fix SCTLR_EL1 initialisation
Date
From: "Suzuki K. Poulose" <suzuki.poulose@arm.com>

We initialise the SCTLR_EL1 value by read-modify-writeback
of the desired bits, leaving the other bits (including reserved
bits(RESx)) untouched. However, sometimes the boot monitor could
leave garbage values in the RESx bits which could have different
implications. This patch makes sure that all the bits, including
the RESx bits, are set to the proper state, except for the
'endianness' control bits, EE(25) & E0E(24)- which are set early
in the el2_setup.

Updated the state of the Bit[6] in the comment to RES0 in the
comment.

Signed-off-by: Suzuki K. Poulose <suzuki.poulose@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
---
arch/arm64/mm/proc.S | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 4e778b1..f1bb1fc 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -244,14 +244,18 @@ ENTRY(__cpu_setup)
ENDPROC(__cpu_setup)

/*
+ * We set the desired value explicitly, including those of the
+ * reserved bits. The values of bits EE & E0E were set early in
+ * el2_setup, which are left untouched below.
+ *
* n n T
* U E WT T UD US IHBS
* CE0 XWHW CZ ME TEEA S
* .... .IEE .... NEAI TE.I ..AD DEN0 ACAM
- * 0011 0... 1101 ..0. ..0. 10.. .... .... < hardware reserved
- * .... .1.. .... 01.1 11.1 ..01 0001 1101 < software settings
+ * 0011 0... 1101 ..0. ..0. 10.. .0.. .... < hardware reserved
+ * .... .1.. .... 01.1 11.1 ..01 0.01 1101 < software settings
*/
.type crval, #object
crval:
- .word 0x000802e2 // clear
- .word 0x0405d11d // set
+ .word 0xfcffffff // clear
+ .word 0x34d5d91d // set
--
1.7.9.5



\
 
 \ /
  Last update: 2014-12-17 17:21    [W:0.058 / U:0.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site