lkml.org 
[lkml]   [2014]   [Dec]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/4] sh-pfc: Add emev2 pinmux support
Date
Greetings,

This patchset introduces pinmux support for the EMMA Mobile EV2 board to
the sh-pfc pin-controller driver. Devicetree bindings for gpio and the
populated serial connector are also defined in 3/4 and 4/4.

Comments are welcome!

Regards
// Niklas

Niklas Söderlund (4):
sh-pfc: add macro to define pinmux without function
sh-pfc: Add emev2 pinmux support
ARM: shmobile: emev2: Add PFC information to emev2.dtsi
ARM: shmobile: emev2-kzm9d: Add PFC information for uart1

.../bindings/pinctrl/renesas,pfc-pinctrl.txt | 1 +
arch/arm/boot/dts/emev2-kzm9d.dts | 13 +
arch/arm/boot/dts/emev2.dtsi | 11 +
drivers/pinctrl/sh-pfc/Kconfig | 5 +
drivers/pinctrl/sh-pfc/Makefile | 1 +
drivers/pinctrl/sh-pfc/core.c | 9 +
drivers/pinctrl/sh-pfc/core.h | 1 +
drivers/pinctrl/sh-pfc/pfc-emev2.c | 1915 ++++++++++++++++++++
drivers/pinctrl/sh-pfc/sh_pfc.h | 2 +
9 files changed, 1958 insertions(+)
create mode 100644 drivers/pinctrl/sh-pfc/pfc-emev2.c

--
2.1.3



\
 
 \ /
  Last update: 2014-12-12 21:41    [W:0.092 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site