lkml.org 
[lkml]   [2014]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCHv5 0/2] Enable Quark X1000 support in gpio-sch
On Mon, Dec 8, 2014 at 6:38 PM, Chang Rebecca Swee Fun
<rebecca.swee.fun.chang@intel.com> wrote:
> Hi all,
>
> This is a revised version for enabling Quark X1000 support in gpio-sch.
> This version of patch series had changed according to the feedback provided
> by Alexandre and Linus.
>
> Change log for V5:
> Patch 1:
> - Change variable curr_dirs to reg_val in order to make driver code easier to
> understand.
>
> Patch 3:
> - Dropped patch 3 for now. We need to re-design the driver's IRQ implementation.
>
> The patches need to be patched on top of Mika Westerberg's commit at:
> gpio: sch: Consolidate core and resume banks
> http://marc.info/?l=linux-kernel&m=141392647225885&w=2
>
> The patches has been verifed and tested working on Galileo Board. GPIO sysfs
> was able to export gpio pins and changing pin direction. GPIO values were
> able to controlled. One of the GPIO pins which is connected to on-board LED
> was used to test GPIO functionality. We are able to turn the LED on/off by
> changing the pin direction and pin value.

I think these patches are good to go, if Linus is ok with it. Nice job
making this driver simpler and more legible. Looking forward to seeing
the IRQ implementation!


\
 
 \ /
  Last update: 2014-12-10 10:41    [W:0.100 / U:0.320 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site