lkml.org 
[lkml]   [2014]   [Dec]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH/RFC v9 06/19] DT: Add documentation for the mfd Maxim max77693
Hi Sakari,

On 12/04/2014 12:40 PM, Jacek Anaszewski wrote:

> On 12/04/2014 11:07 AM, Sakari Ailus wrote:
>> Hi Jacek,
>>
>> On Wed, Dec 03, 2014 at 05:06:41PM +0100, Jacek Anaszewski wrote:
>>> This patch adds device tree binding documentation for
>>> the flash cell of the Maxim max77693 multifunctional device.
>>>
>>> Signed-off-by: Jacek Anaszewski <j.anaszewski@samsung.com>
>>> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
>>> Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
>>> Cc: Lee Jones <lee.jones@linaro.org>
>>> Cc: Chanwoo Choi <cw00.choi@samsung.com>
>>> Cc: Bryan Wu <cooloney@gmail.com>
>>> Cc: Richard Purdie <rpurdie@rpsys.net>
>>> Cc: Rob Herring <robh+dt@kernel.org>
>>> Cc: Pawel Moll <pawel.moll@arm.com>
>>> Cc: Mark Rutland <mark.rutland@arm.com>
>>> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
>>> Cc: Kumar Gala <galak@codeaurora.org>
>>> Cc: <devicetree@vger.kernel.org>
>>> ---
>>> Documentation/devicetree/bindings/mfd/max77693.txt | 89
>>> ++++++++++++++++++++
>>> 1 file changed, 89 insertions(+)
>>>
>>> diff --git a/Documentation/devicetree/bindings/mfd/max77693.txt
>>> b/Documentation/devicetree/bindings/mfd/max77693.txt
>>> index 01e9f30..25a6e78 100644
>>> --- a/Documentation/devicetree/bindings/mfd/max77693.txt
>>> +++ b/Documentation/devicetree/bindings/mfd/max77693.txt
>>> @@ -41,7 +41,66 @@ Optional properties:
>>> To get more informations, please refer to documentaion.
>>> [*] refer Documentation/devicetree/bindings/pwm/pwm.txt
>>>
>>> +- led : the LED submodule device node
>>> +
>>> +There are two led outputs available - fled1 and fled2. Each of them can
>>> +control a separate led or they can be connected together to double
>>> +the maximum current for a single connected led. One led is represented
>>> +by one child node.
>>> +
>>> +Required properties:
>>> +- compatible : Must be "maxim,max77693-led".
>>> +
>>> +Optional properties:
>>> +- maxim,fleds : Array of current outputs in order: fled1, fled2.
>>> + Note: both current outputs can be connected to a single led
>>> + Possible values:
>>> + MAX77693_LED_FLED_UNUSED - the output is left disconnected,
>>> + MAX77693_LED_FLED_USED - a diode is connected to the output.
>>
>> As you have a LED sub-nodes for each LED already, isn't this redundant?
>
> Well, it seems so :)

I agreed here recklessly. This property allows to describe the
situation when one LED is connected to both outputs. Single sub-node
can describe two type of designs: one LED connected to a single
output or one LED connected to both outputs. Therefore additional
property is needed to assess what is the actual case.

Best Regards,
Jacek Anaszewski



\
 
 \ /
  Last update: 2014-12-10 11:41    [W:0.252 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site