lkml.org 
[lkml]   [2014]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v2 3.18-rc3] kdb: Avoid printing KERN_ levels to consoles
From
Date
On Fri, 2014-11-07 at 12:01 +0000, Daniel Thompson wrote:
> Currently when kdb traps printk messages then the raw log level prefix
> (consisting of '\001' followed by a numeral) does not get stripped off
> before the message is issued to the various I/O handlers supported by
> kdb. This causes annoying visual noise as well as causing problems
> grepping for ^. It is also a change of behaviour compared to normal usage
> of printk() usage. For example <SysRq>-h ends up with different output to
> that of kdb's "sr h".
>
> This patch addresses the problem by stripping log levels from messages
> before they are issued to the I/O handlers. printk() which can also
> act as an i/o handler in some cases is special cased; if the caller
> provided a log level then this will be preserved when sent to printk().
>
> The addition of non-printable characters to the output of kdb commands is a
> regression, albeit and extremely elderly one, introduced by commit
> 04d2c8c83d0e ("printk: convert the format for KERN_<LEVEL> to a 2 byte
> pattern"). Note also that this patch does *not* restore the original
> behaviour from v3.5. Instead it makes printk() from within a kdb command
> display the message without any prefix (i.e. like printk() normally does).
[]
> diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
[]
> @@ -711,7 +712,10 @@ kdb_printit:
> if (logging) {
> saved_loglevel = console_loglevel;
> console_loglevel = CONSOLE_LOGLEVEL_SILENT;
> - printk(KERN_INFO "%s", kdb_buffer);
> + if (cp == kdb_buffer)
> + printk(KERN_INFO "%s", kdb_buffer);
> + else
> + printk("%s", kdb_buffer);

The first part of the patch seem fine, but I'm
confused about this bit above.

Here, isn't the "if (cp == kdb_buffer)" unnecessary?

if "(cp != kdb_buffer)", the buffer does have
a prefix and it's emitted.

If (cp == kdb_buffer), the buffer does _not_ have
a prefix (meaning it's either a naked printk or
a continuation line. (KERN_CONT is "")

So why insert KERN_INFO?

I believe the code should be:

- printk(KERN_INFO "%s", kdb_buffer);
+ printk("%s", kdb_buffer);



\
 
 \ /
  Last update: 2014-11-07 17:41    [W:0.120 / U:0.344 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site