lkml.org 
[lkml]   [2014]   [Nov]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 3.18-rc3] kdb: Avoid printing KERN_ levels to consoles
Date
Currently when kdb traps printk messages then the raw log level prefix
(consisting of '\001' followed by a numeral) does not get stripped off
before the message is issued to the various I/O handlers supported by
kdb. This causes annoying visual noise as well as causing problems
grepping for ^. It is also a change of behaviour compared to normal usage
of printk() usage. For example <SysRq>-h ends up with different output to
that of kdb's "sr h".

This patch addresses the problem by stripping log levels from messages
before they are issued to the I/O handlers. printk() which can also
act as an i/o handler in some cases is special cased; if the caller
provided a log level then this will be preserved when sent to printk().

The addition of non-printable characters to the output of kdb commands is a
regression, albeit and extremely elderly one, introduced by commit
04d2c8c83d0e ("printk: convert the format for KERN_<LEVEL> to a 2 byte
pattern"). Note also that this patch does *not* restore the original
behaviour from v3.5. Instead it makes printk() from within a kdb command
display the message without any prefix (i.e. like printk() normally does).

Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Joe Perches <joe@perches.com>
Cc: stable@vger.kernel.org
---

Notes:
This patch is tested both on arm (kgdboc=ttyAMA0) and x86_64
(kgdboc=kdb,ttyS0).

v2:

* Adopt printk_skip_level() to skip the header characters (Joe Perches).

* Update patch description to describe the addition of non-printable
characters to kdb output as a regression and Cc: stable@ (Joe Perches).


kernel/debug/kdb/kdb_io.c | 18 +++++++++++-------
1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/kernel/debug/kdb/kdb_io.c b/kernel/debug/kdb/kdb_io.c
index 7c70812caea5..f3982adf8695 100644
--- a/kernel/debug/kdb/kdb_io.c
+++ b/kernel/debug/kdb/kdb_io.c
@@ -691,19 +691,20 @@ kdb_printit:
* Write to all consoles.
*/
retlen = strlen(kdb_buffer);
+ cp = printk_skip_level(kdb_buffer);
if (!dbg_kdb_mode && kgdb_connected) {
- gdbstub_msg_write(kdb_buffer, retlen);
+ gdbstub_msg_write(cp, retlen - (cp - kdb_buffer));
} else {
if (dbg_io_ops && !dbg_io_ops->is_console) {
- len = retlen;
- cp = kdb_buffer;
+ len = retlen - (cp - kdb_buffer);
+ cp2 = cp;
while (len--) {
- dbg_io_ops->write_char(*cp);
- cp++;
+ dbg_io_ops->write_char(*cp2);
+ cp2++;
}
}
while (c) {
- c->write(c, kdb_buffer, retlen);
+ c->write(c, cp, retlen - (cp - kdb_buffer));
touch_nmi_watchdog();
c = c->next;
}
@@ -711,7 +712,10 @@ kdb_printit:
if (logging) {
saved_loglevel = console_loglevel;
console_loglevel = CONSOLE_LOGLEVEL_SILENT;
- printk(KERN_INFO "%s", kdb_buffer);
+ if (cp == kdb_buffer)
+ printk(KERN_INFO "%s", kdb_buffer);
+ else
+ printk("%s", kdb_buffer);
}

if (KDB_STATE(PAGER)) {
--
1.9.3


\
 
 \ /
  Last update: 2014-11-07 13:21    [W:0.104 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site