lkml.org 
[lkml]   [2014]   [Nov]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 1/3] mfd: add support for Diolan DLN-2 devices
On Wed, Nov 05, 2014 at 07:04:59PM +0200, Octavian Purdila wrote:
> This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO
> Master Adapter DLN-2. Details about the device can be found here:
>
> https://www.diolan.com/i2c/i2c_interface.html.
>
> Information about the USB protocol can be found in the Programmer's
> Reference Manual [1], see section 1.7.
>
> Because the hardware has a single transmit endpoint and a single
> receive endpoint the communication between the various DLN2 drivers
> and the hardware will be muxed/demuxed by this driver.
>
> Each DLN2 module will be identified by the handle field within the DLN2
> message header. If a DLN2 module issues multiple commands in parallel
> they will be identified by the echo counter field in the message header.
>
> The DLN2 modules can use the dln2_transfer() function to issue a
> command and wait for its response. They can also register a callback
> that is going to be called when a specific event id is generated by
> the device (e.g. GPIO interrupts). The device uses handle 0 for
> sending events.
>
> [1] https://www.diolan.com/downloads/dln-api-manual.pdf
>
> Signed-off-by: Octavian Purdila <octavian.purdila@intel.com>

Reviewed-by: Johan Hovold <johan@kernel.org>

Just noticed checkpatch complains about two typos in the header file
(since v9?). ;)

Thanks,
Johan


\
 
 \ /
  Last update: 2014-11-05 18:41    [W:1.214 / U:0.104 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site