lkml.org 
[lkml]   [2014]   [Nov]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 1/1] spi: spi-gpio: Add dt support for a single device with no chip select
Date
From: Torsten Fleischer <torfl6749@gmail.com>

In order to describe a single slave device that has no chip select line
the 'num-chipselects' property has to be <0> and the 'cs-gpios' property
doesn't need to be set.

Signed-off-by: Torsten Fleischer <torfl6749@gmail.com>
---
Documentation/devicetree/bindings/spi/spi-gpio.txt | 6 ++++--
drivers/spi/spi-gpio.c | 21 +++++++++++++++------
2 files changed, 19 insertions(+), 8 deletions(-)

diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.txt b/Documentation/devicetree/bindings/spi/spi-gpio.txt
index 8a824be..a95603b 100644
--- a/Documentation/devicetree/bindings/spi/spi-gpio.txt
+++ b/Documentation/devicetree/bindings/spi/spi-gpio.txt
@@ -8,8 +8,10 @@ Required properties:
- gpio-sck: GPIO spec for the SCK line to use
- gpio-miso: GPIO spec for the MISO line to use
- gpio-mosi: GPIO spec for the MOSI line to use
- - cs-gpios: GPIOs to use for chipselect lines
- - num-chipselects: number of chipselect lines
+ - cs-gpios: GPIOs to use for chipselect lines.
+ Not needed if num-chipselects = <0>.
+ - num-chipselects: Number of chipselect lines. Should be <0> if a single device
+ with no chip select is connected.

Example:

diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index 9f59553..f0492c9 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -413,6 +413,7 @@ static int spi_gpio_probe(struct platform_device *pdev)
struct spi_gpio_platform_data *pdata;
u16 master_flags = 0;
bool use_of = 0;
+ int num_devices;

status = spi_gpio_probe_dt(pdev);
if (status < 0)
@@ -422,16 +423,21 @@ static int spi_gpio_probe(struct platform_device *pdev)

pdata = dev_get_platdata(&pdev->dev);
#ifdef GENERIC_BITBANG
- if (!pdata || !pdata->num_chipselect)
+ if (!pdata || (!use_of && !pdata->num_chipselect))
return -ENODEV;
#endif

+ if (use_of && !SPI_N_CHIPSEL)
+ num_devices = 1;
+ else
+ num_devices = SPI_N_CHIPSEL;
+
status = spi_gpio_request(pdata, dev_name(&pdev->dev), &master_flags);
if (status < 0)
return status;

master = spi_alloc_master(&pdev->dev, sizeof(*spi_gpio) +
- (sizeof(int) * SPI_N_CHIPSEL));
+ (sizeof(int) * num_devices));
if (!master) {
status = -ENOMEM;
goto gpio_free;
@@ -446,7 +452,7 @@ static int spi_gpio_probe(struct platform_device *pdev)
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
master->flags = master_flags;
master->bus_num = pdev->id;
- master->num_chipselect = SPI_N_CHIPSEL;
+ master->num_chipselect = num_devices;
master->setup = spi_gpio_setup;
master->cleanup = spi_gpio_cleanup;
#ifdef CONFIG_OF
@@ -461,9 +467,12 @@ static int spi_gpio_probe(struct platform_device *pdev)
* property of the node.
*/

- for (i = 0; i < SPI_N_CHIPSEL; i++)
- spi_gpio->cs_gpios[i] =
- of_get_named_gpio(np, "cs-gpios", i);
+ if (!SPI_N_CHIPSEL)
+ spi_gpio->cs_gpios[0] = SPI_GPIO_NO_CHIPSELECT;
+ else
+ for (i = 0; i < SPI_N_CHIPSEL; i++)
+ spi_gpio->cs_gpios[i] =
+ of_get_named_gpio(np, "cs-gpios", i);
}
#endif

--
1.8.4.5


\
 
 \ /
  Last update: 2014-11-03 17:41    [W:0.059 / U:1.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site