lkml.org 
[lkml]   [2014]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 7/7] ARM: dts: exynos4412-trats: Switch max77686 regulators to GPIO control
Date
Remove fixed regulators (duplicating what max77686 provides) and
add GPIO control to max77686 regulators. Add of_compatible to
voltage-regulators node.

This gives the system full control over those regulators. Previously
the state of such regulators was a mixture of what max77686 driver set
over I2C and what regulator-fixed set through GPIO.

Removal of 'regulator-always-on' from CAM_ISP_CORE_1.2V (buck9) allows
disabling it when it is not used. Previously this regulator was always
enabled because its enable state is a OR of:
- ENB9 GPIO (turned always on by regulator-fixed),
- BUCK9EN field in BUCK9CTRL register (off by max77686 through I2C).

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
arch/arm/boot/dts/exynos4412-trats2.dts | 25 +++++--------------------
1 file changed, 5 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts
index 7a68e0832cd6..4ba981eae32e 100644
--- a/arch/arm/boot/dts/exynos4412-trats2.dts
+++ b/arch/arm/boot/dts/exynos4412-trats2.dts
@@ -58,15 +58,6 @@
#address-cells = <1>;
#size-cells = <0>;

- vemmc_reg: regulator-0 {
- compatible = "regulator-fixed";
- regulator-name = "VMEM_VDD_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- gpio = <&gpk0 2 0>;
- enable-active-high;
- };
-
cam_io_reg: voltage-regulator-1 {
compatible = "regulator-fixed";
regulator-name = "CAM_SENSOR_A";
@@ -94,16 +85,6 @@
enable-active-high;
};

- cam_isp_core_reg: voltage-regulator-4 {
- compatible = "regulator-fixed";
- regulator-name = "CAM_ISP_CORE_1.2V_EN";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- gpio = <&gpm0 3 0>;
- enable-active-high;
- regulator-always-on;
- };
-
ps_als_reg: voltage-regulator-5 {
compatible = "regulator-fixed";
regulator-name = "LED_A_3.0V";
@@ -405,6 +386,7 @@
regulator-name = "VTF_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ ena-gpios = <&gpy2 0 GPIO_ACTIVE_HIGH>;
};

ldo22_reg: ldo22 {
@@ -412,6 +394,7 @@
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
+ ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};

ldo23_reg: ldo23 {
@@ -518,6 +501,7 @@
regulator-name = "VMEM_VDDF_3.0V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
+ ena-gpios = <&gpk0 2 GPIO_ACTIVE_HIGH>;
};

buck9_reg: buck9 {
@@ -525,6 +509,7 @@
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1200000>;
+ ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>;
};
};
};
@@ -591,7 +576,7 @@
broken-cd;
non-removable;
card-detect-delay = <200>;
- vmmc-supply = <&vemmc_reg>;
+ vmmc-supply = <&ldo22_reg>;
clock-frequency = <400000000>;
samsung,dw-mshc-ciu-div = <0>;
samsung,dw-mshc-sdr-timing = <2 3>;
--
1.9.1


\
 
 \ /
  Last update: 2014-11-27 13:01    [W:0.167 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site