lkml.org 
[lkml]   [2014]   [Nov]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 2/7] regulator: dt-bindings: Document the ena-gpios property
Date
Document new properties for regulators (ena-gpios and
ena-gpio-open-drain) for enabling control over GPIO.

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
---
Documentation/devicetree/bindings/regulator/regulator.txt | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index 4e7ed762b3bb..dad57b3badc7 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -30,6 +30,10 @@ Optional properties:
- regulator-off-in-suspend: regulator should be off in suspend state.
- regulator-suspend-microvolt: regulator should be set to this voltage
in suspend.
+- ena-gpios: GPIO to use for enable control. Actual implementation depends
+ on regulator driver. The bindings documentation for given driver describes
+ which regulator actually supports it.
+- ena-gpio-open-drain: GPIO is open drain type.

Deprecated properties:
- regulator-compatible: If a regulator chip contains multiple
--
1.9.1


\
 
 \ /
  Last update: 2014-11-27 13:01    [W:0.165 / U:0.028 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site