lkml.org 
[lkml]   [2014]   [Nov]   [26]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] null_blk: boundary check queue_mode and irqmode
Date
When either queue_mode or irq_mode parameter is set outside its boundaries, the
driver will not complete requests. This stalls driver initialization when
partitions are probed. Fix by setting out of bound values to the parameters
default.

Signed-off-by: Matias Bjørling <m@bjorling.me>
---
drivers/block/null_blk.c | 58 ++++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 56 insertions(+), 2 deletions(-)

diff --git a/drivers/block/null_blk.c b/drivers/block/null_blk.c
index 8001e81..9b865ed 100644
--- a/drivers/block/null_blk.c
+++ b/drivers/block/null_blk.c
@@ -78,7 +78,34 @@ module_param(home_node, int, S_IRUGO);
MODULE_PARM_DESC(home_node, "Home node for the device");

static int queue_mode = NULL_Q_MQ;
-module_param(queue_mode, int, S_IRUGO);
+
+static int null_set_queue_mode(const char *val, const struct kernel_param *kp)
+{
+ int ret, new_queue_mode;
+
+ ret = kstrtoint(val, 10, &new_queue_mode);
+ if (ret)
+ goto fail;
+
+ if (new_queue_mode < 0 || new_queue_mode > 2) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ queue_mode = new_queue_mode;
+
+ return 0;
+fail:
+ pr_warn("null_blk: defaults queue_mode to multiqueue\n");
+ return ret;
+}
+
+static struct kernel_param_ops null_queue_mode_param_ops = {
+ .set = null_set_queue_mode,
+ .get = param_get_int,
+};
+
+device_param_cb(queue_mode, &null_queue_mode_param_ops, &queue_mode, S_IRUGO);
MODULE_PARM_DESC(queue_mode, "Block interface to use (0=bio,1=rq,2=multiqueue)");

static int gb = 250;
@@ -94,7 +121,34 @@ module_param(nr_devices, int, S_IRUGO);
MODULE_PARM_DESC(nr_devices, "Number of devices to register");

static int irqmode = NULL_IRQ_SOFTIRQ;
-module_param(irqmode, int, S_IRUGO);
+
+static int null_set_irqmode(const char *val, const struct kernel_param *kp)
+{
+ int ret, new_irqmode;
+
+ ret = kstrtoint(val, 10, &new_irqmode);
+ if (ret)
+ goto fail;
+
+ if (new_irqmode < 0 || new_irqmode > 2) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ irqmode = new_irqmode;
+
+ return 0;
+fail:
+ pr_warn("null_blk: defaults to irqmode to softirq\n");
+ return ret;
+}
+
+static struct kernel_param_ops null_irqmode_param_ops = {
+ .set = null_set_irqmode,
+ .get = param_get_int,
+};
+
+device_param_cb(irqmode, &null_irqmode_param_ops, &irqmode, S_IRUGO);
MODULE_PARM_DESC(irqmode, "IRQ completion handler. 0-none, 1-softirq, 2-timer");

static int completion_nsec = 10000;
--
2.1.0


\
 
 \ /
  Last update: 2014-11-26 22:21    [W:3.018 / U:0.824 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site