lkml.org 
[lkml]   [2014]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] regulator: adding disable options for regulator-always-on and regulator-boots-on
Date
From: "hugh.kang" <hugh.kang@lge.com>

If a regulator is set by always-on option, the regulator will be set forever.
For example, suppose LDO1 is set to always-on at RevA.dts with including of a.dtsi. After that
RevB.dts may wants to include the same a.dtsi but override the LDO1 always-on option. However,
currently there is no way to delete the always-on option, even when we change the LDO1 option value,
the always-on setting is still remains.

Signed-off-by: hugh.kang <hugh.kang@lge.com>
---
drivers/regulator/of_regulator.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index ee5e67b..4178dbd 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -52,7 +52,13 @@ static void of_get_regulation_constraints(struct device_node *np,
constraints->valid_ops_mask |= REGULATOR_CHANGE_CURRENT;

constraints->boot_on = of_property_read_bool(np, "regulator-boot-on");
+ if (of_property_read_bool(np, "regulator-disable-boot-on"))
+ constraints->boot_on = false;
+
constraints->always_on = of_property_read_bool(np, "regulator-always-on");
+ if (of_property_read_bool(np, "regulator-disable-always-on"))
+ constraints->always_on = false;
+
if (!constraints->always_on) /* status change should be possible. */
constraints->valid_ops_mask |= REGULATOR_CHANGE_STATUS;

--
1.8.3.2


\
 
 \ /
  Last update: 2014-11-03 02:41    [W:0.067 / U:0.328 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site