lkml.org 
[lkml]   [2014]   [Nov]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] usb: dwc2: resume root hub when device detect with suspend state
Date
After we implement the bus_suspend/resume, auto suspend id enabled.
The root hub will be auto suspend if there is no device connected,
we need to resume the root hub when a device connect detect.

This patch tested on rk3288.

Signed-off-by: Roy Li <roy.li@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
---

Changes in v2:
- add definition for hcd structure
- remove check for bus->root_hub

drivers/usb/dwc2/hcd_intr.c | 5 +++++
1 file changed, 5 insertions(+)

diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c
index 551ba87..680206f 100644
--- a/drivers/usb/dwc2/hcd_intr.c
+++ b/drivers/usb/dwc2/hcd_intr.c
@@ -329,6 +329,7 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg)
{
u32 hprt0;
u32 hprt0_modify;
+ struct usb_hcd *hcd = (struct usb_hcd *)hsotg->priv;

dev_vdbg(hsotg->dev, "--Port Interrupt--\n");

@@ -354,6 +355,10 @@ static void dwc2_port_intr(struct dwc2_hsotg *hsotg)
hsotg->flags.b.port_connect_status = 1;
hprt0_modify |= HPRT0_CONNDET;

+ /* resume root hub? */
+ if (hcd->state == HC_STATE_SUSPENDED)
+ usb_hcd_resume_root_hub(hcd);
+
/*
* The Hub driver asserts a reset when it sees port connect
* status change flag
--
1.9.1


\
 
 \ /
  Last update: 2014-11-18 02:41    [W:0.070 / U:1.628 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site