Messages in this thread | | | From | Beniamino Galvani <> | Subject | [PATCH v2 0/4] spi: Add support for Amlogic Meson SPIFC | Date | Mon, 17 Nov 2014 23:47:47 +0100 |
| |
Hi,
this patchset adds a driver for the SPIFC (SPI flash controller) available in Amlogic Meson6 and Meson8 SoCs. The driver has been tested on a Meson8 based device to communicate with a Macronix mx25l1606e serial flash.
The first patch adds a field to the spi_transfer structure that allows the driver to know in transfer_one() whether the transfer is the last one and change CS accordingly, without the need to reimplement transfer_one_message().
Changes since v1 [ https://lkml.org/lkml/2014/11/9/35 ]: - decrease busy wait timeout - remove check on xfer->speed_hz value in meson_spifc_transfer_one() - implement transfer_one() instead of transfer_one_message() - remove useless memset of devdata - use fixed regmap config - implement PM operations - don't set master->bus_num - allow modular build of the driver
Beniamino Galvani (4): spi: Add 'last' flag to spi_transfer structure spi: meson: Add device tree bindings documentation for SPIFC spi: meson: Add support for Amlogic Meson SPIFC ARM: dts: meson: add node for SPIFC
.../devicetree/bindings/spi/spi-meson.txt | 22 + arch/arm/boot/dts/meson.dtsi | 9 + drivers/spi/Kconfig | 7 + drivers/spi/Makefile | 1 + drivers/spi/spi-meson-spifc.c | 461 +++++++++++++++++++++ drivers/spi/spi.c | 6 + include/linux/spi/spi.h | 2 + 7 files changed, 508 insertions(+) create mode 100644 Documentation/devicetree/bindings/spi/spi-meson.txt create mode 100644 drivers/spi/spi-meson-spifc.c
-- 1.9.1
| |