lkml.org 
[lkml]   [2014]   [Nov]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1 linux-next] fusion: move seq_mpt_print_ioc_summary under CONFIG_PROC_FS
Date
replace seq_mpt_print_ioc_summary forward declaration under CONFIG_PROC_FS
by function declaration.

This fixes the following warning when CONFIG_PROC_FS is not set.

drivers/message/fusion/mptbase.c:6875:13: warning:
'seq_mpt_print_ioc_summary' defined but not used [-Wunused-function]
static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc,
struct seq_file *m, int showlan)

This patch also fixes some checkpatch warnings:
-lines over 80 characters
-(u8*) -> (u8 *)
-seq_puts instead of seq_printf for "(disabled)"
-blank line after declarations

Signed-off-by: Fabian Frederick <fabf@skynet.be>
---
drivers/message/fusion/mptbase.c | 67 ++++++++++++++++++++--------------------
1 file changed, 34 insertions(+), 33 deletions(-)

diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 187f836..6b60b2f 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -6628,7 +6628,40 @@ procmpt_destroy(void)
/*
* Handles read request from /proc/mpt/summary or /proc/mpt/iocN/summary.
*/
-static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan);
+static void
+seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
+{
+ char expVer[32];
+
+ mpt_get_fw_exp_ver(expVer, ioc);
+
+ /*
+ * Shorter summary of attached ioc's...
+ */
+ seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
+ ioc->name,
+ ioc->prod_name,
+ MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
+ ioc->facts.FWVersion.Word,
+ expVer,
+ ioc->facts.NumberOfPorts,
+ ioc->req_depth);
+
+ if (showlan && (ioc->pfacts[0].ProtocolFlags &
+ MPI_PORTFACTS_PROTOCOL_LAN)) {
+ u8 *a = (u8 *)&ioc->lan_cnfg_page1.HardwareAddressLow;
+
+ seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
+ a[5], a[4], a[3], a[2], a[1], a[0]);
+ }
+
+ seq_printf(m, ", IRQ=%d", ioc->pci_irq);
+
+ if (!ioc->active)
+ seq_puts(m, " (disabled)");
+
+ seq_putc(m, '\n');
+}

static int mpt_summary_proc_show(struct seq_file *m, void *v)
{
@@ -6872,38 +6905,6 @@ mpt_print_ioc_summary(MPT_ADAPTER *ioc, char *buffer, int *size, int len, int sh
*size = y;
}

-static void seq_mpt_print_ioc_summary(MPT_ADAPTER *ioc, struct seq_file *m, int showlan)
-{
- char expVer[32];
-
- mpt_get_fw_exp_ver(expVer, ioc);
-
- /*
- * Shorter summary of attached ioc's...
- */
- seq_printf(m, "%s: %s, %s%08xh%s, Ports=%d, MaxQ=%d",
- ioc->name,
- ioc->prod_name,
- MPT_FW_REV_MAGIC_ID_STRING, /* "FwRev=" or somesuch */
- ioc->facts.FWVersion.Word,
- expVer,
- ioc->facts.NumberOfPorts,
- ioc->req_depth);
-
- if (showlan && (ioc->pfacts[0].ProtocolFlags & MPI_PORTFACTS_PROTOCOL_LAN)) {
- u8 *a = (u8*)&ioc->lan_cnfg_page1.HardwareAddressLow;
- seq_printf(m, ", LanAddr=%02X:%02X:%02X:%02X:%02X:%02X",
- a[5], a[4], a[3], a[2], a[1], a[0]);
- }
-
- seq_printf(m, ", IRQ=%d", ioc->pci_irq);
-
- if (!ioc->active)
- seq_printf(m, " (disabled)");
-
- seq_putc(m, '\n');
-}
-
/**
* mpt_set_taskmgmt_in_progress_flag - set flags associated with task management
* @ioc: Pointer to MPT_ADAPTER structure
--
1.9.3


\
 
 \ /
  Last update: 2014-11-01 12:21    [W:0.049 / U:0.724 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site