lkml.org 
[lkml]   [2014]   [Oct]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 6/8] regulator: max77686: Add external GPIO control
Hi, and thanks for bringing this issue to us!

On Wed, Oct 29, 2014 at 7:49 PM, Javier Martinez Canillas
<javier.martinez@collabora.co.uk> wrote:
> [adding Linus and Alexandre to the cc list]
>
> Hello Krzysztof,
>
> On 10/29/2014 11:42 AM, Krzysztof Kozlowski wrote:
>> On wto, 2014-10-28 at 13:11 +0100, Krzysztof Kozlowski wrote:
>>> On wto, 2014-10-28 at 09:52 +0100, Krzysztof Kozlowski wrote:
>>> > On pon, 2014-10-27 at 21:03 +0100, Javier Martinez Canillas wrote:
>>> > > Hello Krzysztof,
>>> > >
>>> > > On 10/27/2014 04:03 PM, Krzysztof Kozlowski wrote:
>>> > > > @@ -85,6 +91,9 @@ struct max77686_data {
>>> > > > struct max77686_regulator_data *regulators;
>>> > > > int num_regulators;
>>> > > >
>>> > > > + /* Array of size num_regulators with GPIOs for external control. */
>>> > > > + int *ext_control_gpio;
>>> > > > +
>>> > >
>>> > > The integer-based GPIO API is deprecated in favor of the descriptor-based GPIO
>>> > > interface (Documentation/gpio/consumer.txt). Could you please use the later?
>>> >
>>> > Sure, I can. Please have in mind that regulator core still accepts old
>>> > GPIO so I will have to use desc_to_gpio(). That should work... and
>>> > should be future-ready.
>>>
>>> It seems I was too hasty... I think usage of the new gpiod API implies
>>> completely different bindings.
>>>
>>> The gpiod_get() gets GPIO from a device level, not from given sub-node
>>> pointer. This means that you cannot have DTS like this:
>>> ldo21_reg: ldo21 {
>>> regulator-compatible = "LDO21";
>>> regulator-name = "VTF_2.8V";
>>> regulator-min-microvolt = <2800000>;
>>> regulator-max-microvolt = <2800000>;
>>> ec-gpio = <&gpy2 0 0>;
>>> };
>>>
>>> ldo22_reg: ldo22 {
>>> regulator-compatible = "LDO22";
>>> regulator-name = "VMEM_VDD_2.8V";
>>> regulator-min-microvolt = <2800000>;
>>> regulator-max-microvolt = <2800000>;
>>> ec-gpio = <&gpk0 2 0>;
>>> };
>>>
>>>
>>> I could put GPIOs in device node:
>>>
>>> max77686_pmic@09 {
>>> compatible = "maxim,max77686";
>>> interrupt-parent = <&gpx0>;
>>> interrupts = <7 0>;
>>> reg = <0x09>;
>>> #clock-cells = <1>;
>>> ldo21-gpio = <&gpy2 0 0>;
>>> ldo22-gpio = <&gpk0 2 0>;
>>>
>>> ldo21_reg: ldo21 {
>>> regulator-compatible = "LDO21";
>>> regulator-name = "VTF_2.8V";
>>> regulator-min-microvolt = <2800000>;
>>> regulator-max-microvolt = <2800000>;
>>> };
>>>
>>> ldo22_reg: ldo22 {
>>> regulator-compatible = "LDO22";
>>> regulator-name = "VMEM_VDD_2.8V";
>>> regulator-min-microvolt = <2800000>;
>>> regulator-max-microvolt = <2800000>;
>>> };
>>>
>>> This would work but I don't like it. The properties of a regulator are
>>> above the node configuring that regulator.
>>>
>>> Any ideas?
>>>
>>
>> Continuing talking to myself... I found another problem - GPIO cannot be
>> requested more than once (-EBUSY). In case of this driver (and board:
>> Trats2) one GPIO is connected to regulators. The legacy GPIO API and
>> regulator core handle this.
>>
>> With new GPIO API I would have to implement some additional steps in
>> such case...
>>
>> So there are 2 issues:
>> 1. Cannot put GPIO property in regulator node.

For this problem you will probably want to use the
dev(m)_get_named_gpiod_from_child() function from the following patch:

https://lkml.org/lkml/2014/10/6/529

It should reach -next soon now.

>> 2. Cannot request some GPIO more than once.

We have been confronted to this problem with the regulator core as well:

http://marc.info/?l=linux-arm-kernel&m=140417649119733&w=1

I have a draft patch that allows GPIOs to be requested by several
clients. What prevented me from submitting it was that I wanted to
make sure the different requested configurations were compatible, but
maybe I am overthinking this. There are also a couple of other patches
that this depends on (like removal of the big descs array), so I don't
think it will be available too soon, sadly.

So maybe your best shot for now is to keep using the integer API, as
much as I hate it. Once we become able to request the same GPIO
several times, you should be good to switch to descriptors. Sorry this
has not been done faster.


\
 
 \ /
  Last update: 2014-10-30 15:01    [W:0.086 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site