lkml.org 
[lkml]   [2014]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH 0/8] regulator: max77686: Add GPIO control
Date
Hi,


This patch helps in proper description of max77686 regulators in DTS by
allowing to control them over GPIO. This allows removal of
fixed regulators from DTS which duplicate the description of hardware.

The first five patches are cleanups, including board support removal.

The whole patchset should be taken at once.

Patchset is rebased on next-20141023 AND:
1. ARM: EXYNOS: Call regulator suspend prepare/finish
https://lkml.org/lkml/2014/10/20/545
2. regulator: max77686/trats2: Disable some regulators in suspend
https://lkml.org/lkml/2014/10/27/280


Best regards,
Krzysztof

Krzysztof Kozlowski (8):
regulator: max77802: Remove support for board files
regulator: max77686: Remove support for board files
mfd: max77686/802: Remove support for board files
regulator: max77686: Make regulator_desc array const
regulator: max77686: Initialize opmode explicitly to normal mode
regulator: max77686: Add external GPIO control
mfd/regulator: dt-bindings: max77686: Document gpio property
ARM: dts: exynos4412-trats: Switch max77686 regulators to GPIO control

Documentation/devicetree/bindings/mfd/max77686.txt | 3 +
arch/arm/boot/dts/exynos4412-trats2.dts | 25 +---
drivers/mfd/max77686.c | 23 ---
drivers/regulator/max77686.c | 158 +++++++++++++++------
drivers/regulator/max77802.c | 44 ++----
include/linux/mfd/max77686-private.h | 1 -
include/linux/mfd/max77686.h | 22 ---
7 files changed, 141 insertions(+), 135 deletions(-)

--
1.9.1



\
 
 \ /
  Last update: 2014-10-27 17:01    [W:0.194 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site