lkml.org 
[lkml]   [2014]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCHv4 0/3] ARM: dts: Add new board dts file for Exynos3250-based Rinato board
Date
Chanwoo Choi wrote:
>
> Dear Kukjin,
>
Hi,

> Did you please pick up this patchset on 3.19 queue?
>
I'll apply this series once my previous pull-request which has been sent out
last week is merged into arm-soc tree.

If any comments on this series, I'll let you know.

Thanks,
Kukjin


> Best Regards,
> Chanwoo Choi
>
> On 10/24/2014 10:12 PM, Chanwoo Choi wrote:
> > This patchset adds new board dts file for Samsung Rinato board (Gear 2) which
> > is based on Exynos3250 SoC and adds sleep mode pin configuration using pinctrl
> > subsystem to reduce leakage power-consumption in sleep state.
> >
> > This patchset is based on linux-samsung.git (for-next branch).
> >
> > Changes from v3:
> > - Fix wrong email address
> > - Remove 'vemmc_reg' fixed regulator and then use 'ldo12_reg' for mshc_0
> >
> > Changes from v2:
> > - Separate patch3 from patchset[1] and then this patchset includes patch3.
> > After applied patch3, the power-consumption of Rinato board is 0.6mA in suspend state.
> > [1] [PATCHv5 0/3] regulator: of: Add support for parsing regulator suspend state
> > : https://lkml.org/lkml/2014/10/10/161
> > - Change PDN (Power-down mode) state for GPE0-3 (BT_UART_RTS) because Rinato
> > board uses UART1 for bluetooth device. BT_UART_RTS pin should be disabled in
> > suspend state by setting high state of GPE0-3
> > - Turn on always the regulator state of VAP_VMIPI_1.0V because if VAP_VMIPI_1.0V
> > is off state or would be not controlled by DRM driver, happen imprecise external abort.
> >
> > Changes from v1:
> > - Remove useless brace
> > - Remove unneeded 'regulators' keyword
> > - Consolidate memory information in one entry
> >
> > Chanwoo Choi (3):
> > ARM: dts: Add board dts file for Exynos3250-based Rinato board
> > ARM: dts: Add sleep mode pin configuration for exynos3250-rinato
> > ARM: dts: Add sleep mode of regulator for exynos3250-rinato board
> >
> > arch/arm/boot/dts/Makefile | 3 +-
> > arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 16 +
> > arch/arm/boot/dts/exynos3250-rinato.dts | 686 ++++++++++++++++++++++++++++++
> > 3 files changed, 704 insertions(+), 1 deletion(-)
> > create mode 100644 arch/arm/boot/dts/exynos3250-rinato.dts
> >



\
 
 \ /
  Last update: 2014-10-28 01:41    [W:0.331 / U:0.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site