lkml.org 
[lkml]   [2014]   [Oct]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv4 0/3] ARM: dts: Add new board dts file for Exynos3250-based Rinato board
Dear Kukjin,

Did you please pick up this patchset on 3.19 queue?

Best Regards,
Chanwoo Choi

On 10/24/2014 10:12 PM, Chanwoo Choi wrote:
> This patchset adds new board dts file for Samsung Rinato board (Gear 2) which
> is based on Exynos3250 SoC and adds sleep mode pin configuration using pinctrl
> subsystem to reduce leakage power-consumption in sleep state.
>
> This patchset is based on linux-samsung.git (for-next branch).
>
> Changes from v3:
> - Fix wrong email address
> - Remove 'vemmc_reg' fixed regulator and then use 'ldo12_reg' for mshc_0
>
> Changes from v2:
> - Separate patch3 from patchset[1] and then this patchset includes patch3.
> After applied patch3, the power-consumption of Rinato board is 0.6mA in suspend state.
> [1] [PATCHv5 0/3] regulator: of: Add support for parsing regulator suspend state
> : https://lkml.org/lkml/2014/10/10/161
> - Change PDN (Power-down mode) state for GPE0-3 (BT_UART_RTS) because Rinato
> board uses UART1 for bluetooth device. BT_UART_RTS pin should be disabled in
> suspend state by setting high state of GPE0-3
> - Turn on always the regulator state of VAP_VMIPI_1.0V because if VAP_VMIPI_1.0V
> is off state or would be not controlled by DRM driver, happen imprecise external abort.
>
> Changes from v1:
> - Remove useless brace
> - Remove unneeded 'regulators' keyword
> - Consolidate memory information in one entry
>
> Chanwoo Choi (3):
> ARM: dts: Add board dts file for Exynos3250-based Rinato board
> ARM: dts: Add sleep mode pin configuration for exynos3250-rinato
> ARM: dts: Add sleep mode of regulator for exynos3250-rinato board
>
> arch/arm/boot/dts/Makefile | 3 +-
> arch/arm/boot/dts/exynos3250-pinctrl.dtsi | 16 +
> arch/arm/boot/dts/exynos3250-rinato.dts | 686 ++++++++++++++++++++++++++++++
> 3 files changed, 704 insertions(+), 1 deletion(-)
> create mode 100644 arch/arm/boot/dts/exynos3250-rinato.dts
>



\
 
 \ /
  Last update: 2014-10-28 01:01    [W:0.064 / U:0.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site