lkml.org 
[lkml]   [2014]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 1/2] iio: vadc: Qualcomm SPMI PMIC voltage ADC driver
From
Date
+iio maintainers

On Thu, 2014-10-02 at 12:29 +0300, Ivan T. Ivanov wrote:
> Hi Stan,
>
> On 09/24/2014 03:56 PM, Stanimir Varbanov wrote:
>
> <snip>
>
> > +static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node)
> > +{
> > + struct iio_chan_spec *iio_chan = vadc->iio_chans;
> > + const struct vadc_channels *vadc_chan;
> > + struct vadc_channel_prop prop;
> > + struct device_node *child;
> > + int ret, index = 0;
> > +
> > + for_each_available_child_of_node(node, child) {
> > + ret = vadc_get_dt_channel_data(vadc->dev, &prop, child);
> > + if (ret)
> > + return ret;
> > +
> > + vadc->chan_props[index] = prop;
> > +
> > + vadc_chan = &vadc_chans[prop.channel];
> > +
> > + iio_chan->channel = prop.channel;
> > + iio_chan->datasheet_name = vadc_chan->datasheet_name;
> > + iio_chan->info_mask_separate = vadc_chan->info_mask;
> > + iio_chan->type = vadc_chan->type;
> > + iio_chan->indexed = 1;
> > + iio_chan->scan_type.sign = 's';
> > + iio_chan->scan_type.realbits = 15;
> > + iio_chan->scan_type.storagebits = 16;
> > + iio_chan->address = index++;
> > +
> > + iio_chan++;
> > + }
> > +
> > + return 0;
> > +}
> > +
>
> <snip>
>
> > +static int vadc_probe(struct platform_device *pdev)
> > +{
>
> <snip>
>
> > +
> > + indio_dev->dev.parent = dev;
> > + indio_dev->dev.of_node = node;
> > + indio_dev->name = pdev->name;
> > + indio_dev->modes = INDIO_DIRECT_MODE;
> > + indio_dev->info = &vadc_info;
> > + indio_dev->channels = vadc->iio_chans;
> > + indio_dev->num_channels = vadc->nchannels;
>
> This will not work as we thought. Registration will be fine and entries
> in sysfs are created as expected, but this is breaking numbering scheme
> for client drivers. For us the problem is that iio framework expect channels
> numbering to be linear and channel number should not be greater than
> channel count. For example even if die temperature channel is always 8, if
> I describe only 5 channels in DTS files (4 for reference points measurement)
> and 1 for die temperature, clients could not get OF reference to
> temperature
> channel using io-channels = <&pm8941_vadc 8>;
>
> Jonathan, please, could you advise us.
>
> Regards,
> Ivan
>
> > +
> > + return devm_iio_device_register(dev, indio_dev);
> > +}
> > +
> >
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html




\
 
 \ /
  Last update: 2014-10-02 14:41    [W:0.150 / U:0.528 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site