lkml.org 
[lkml]   [2014]   [Oct]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 1/2] iio: vadc: Qualcomm SPMI PMIC voltage ADC driver
Date

Hi Stan,

On 09/24/2014 03:56 PM, Stanimir Varbanov wrote:

<snip>

> +static int vadc_get_dt_data(struct vadc_priv *vadc, struct device_node *node)
> +{
> + struct iio_chan_spec *iio_chan = vadc->iio_chans;
> + const struct vadc_channels *vadc_chan;
> + struct vadc_channel_prop prop;
> + struct device_node *child;
> + int ret, index = 0;
> +
> + for_each_available_child_of_node(node, child) {
> + ret = vadc_get_dt_channel_data(vadc->dev, &prop, child);
> + if (ret)
> + return ret;
> +
> + vadc->chan_props[index] = prop;
> +
> + vadc_chan = &vadc_chans[prop.channel];
> +
> + iio_chan->channel = prop.channel;
> + iio_chan->datasheet_name = vadc_chan->datasheet_name;
> + iio_chan->info_mask_separate = vadc_chan->info_mask;
> + iio_chan->type = vadc_chan->type;
> + iio_chan->indexed = 1;
> + iio_chan->scan_type.sign = 's';
> + iio_chan->scan_type.realbits = 15;
> + iio_chan->scan_type.storagebits = 16;
> + iio_chan->address = index++;
> +
> + iio_chan++;
> + }
> +
> + return 0;
> +}
> +

<snip>

> +static int vadc_probe(struct platform_device *pdev)
> +{

<snip>

> +
> + indio_dev->dev.parent = dev;
> + indio_dev->dev.of_node = node;
> + indio_dev->name = pdev->name;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->info = &vadc_info;
> + indio_dev->channels = vadc->iio_chans;
> + indio_dev->num_channels = vadc->nchannels;

This will not work as we thought. Registration will be fine and entries
in sysfs are created as expected, but this is breaking numbering scheme
for client drivers. For us the problem is that iio framework expect channels
numbering to be linear and channel number should not be greater than
channel count. For example even if die temperature channel is always 8, if
I describe only 5 channels in DTS files (4 for reference points measurement)
and 1 for die temperature, clients could not get OF reference to
temperature
channel using io-channels = <&pm8941_vadc 8>;

Jonathan, please, could you advise us.

Regards,
Ivan

> +
> + return devm_iio_device_register(dev, indio_dev);
> +}
> +
>



\
 
 \ /
  Last update: 2014-10-02 12:21    [W:0.970 / U:1.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site