lkml.org 
[lkml]   [2014]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH fixes 2/2] extcon: max77693: Fix always masked MUIC interrupts
From
Date
On pią, 2014-10-10 at 19:05 +0900, Chanwoo Choi wrote:
> On 10/10/2014 06:03 PM, Krzysztof Kozlowski wrote:
> > On pią, 2014-10-10 at 17:45 +0900, Chanwoo Choi wrote:
> >> On 10/10/2014 05:22 PM, Krzysztof Kozlowski wrote:
> >>> All interrupts coming from MUIC were ignored because interrupt source
> >>> register was masked.
> >>>
> >>> The Maxim 77693 has a "interrupt source" - a separate register and interrupts
> >>> which give information about PMIC block triggering the individual
> >>> interrupt (charger, topsys, MUIC, flash LED).
> >>>
> >>> By default bootloader could initialize this register to "mask all"
> >>> value. In such case (observed on Trats2 board) MUIC interrupts won't be
> >>> generated regardless of their mask status. Regmap irq chip was unmasking
> >>> individual MUIC interrupts but the source was masked
> >>>
> >>> Before introducing regmap irq chip this interrupt source was unmasked,
> >>> read and acked. Reading and acking is not necessary but unmasking is. Do
> >>> it in extcon driver.
> >>>
> >>> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
> >>> Cc: <stable@vger.kernel.org>
> >>> Fixes: 342d669c1ee4 ("mfd: max77693: Handle IRQs using regmap")
> >>> ---
> >>> drivers/extcon/extcon-max77693.c | 16 ++++++++++++++++
> >>> include/linux/mfd/max77693-private.h | 5 +++++
> >>> 2 files changed, 21 insertions(+)
> >>>
> >>> diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c
> >>> index 490e27475bac..d3adacf3187f 100644
> >>> --- a/drivers/extcon/extcon-max77693.c
> >>> +++ b/drivers/extcon/extcon-max77693.c
> >>> @@ -1176,6 +1176,22 @@ static int max77693_muic_probe(struct platform_device *pdev)
> >>> }
> >>> }
> >>>
> >>> + if (i) {
> >>> + /*
> >>> + * i>0, at least one MUIC interrupt requested so need to unmask
> >>> + * MUIC interrupt in INTSRC register. Without that MUIC
> >>> + * interrupts will not be reported.
> >>> + */
> >>> + ret = regmap_update_bits(max77693->regmap,
> >>> + MAX77693_PMIC_REG_INTSRC_MASK, SRC_IRQ_MUIC,
> >>> + ~SRC_IRQ_MUIC);
> >>> + if (ret < 0) {
> >>> + dev_err(&pdev->dev, "Could not unmask MUIC interrupt in INTSRC: %d\n",
> >>> + ret);
> >>> + return ret;
> >>> + }
> >>> + }
> >>> +
> >>
> >> No,
> >> The extcon-max77693 driver cannot enable IRQ_CHARGER/TOP/FLASH
> >> because MAX77693_PMIC_REG_INTSRC_MASK register is common register of MAX77693.
> >>
> >> The IRQ_CHARGER/TOP/FLASH of MAX77693_PMIC_REG_INTSRC_MASK register should be enabled
> >> in drivers/mfd/max77693.c.
> >
> > The code above unmasks only SRC_IRQ_MUIC. Other bits are not touched.
> > Why do you think that other IRQs will be enabled?
>
> I think that MAX77693_PMIC_REG_INTSRC_MASK common register better to be controlled
> in drivers/mfd/max77693.c. I prefer that MAX77693 extcon driver would read/write only MUIC registers.
>
> Also, MAX77693 extcon driver have to be always unmasked.
> If IRQ_MUIC is masked, MAX77693 extcon driver could not detect any external cables.
>
> For example,
> The max77836 enable MUIC_IRQ by un-masking MUIC_IRQ.
> You can check it on drivers/mfd/max14577.c (line 251~258)

Sure, I get it. I'll do it the same as in max14577 driver.

Thanks for feedback!
Krzysztof

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-10-10 12:42    [W:0.123 / U:0.380 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site