[lkml]   [2014]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
Patch in this message
Subject[PATCH fixes 1/2] mfd: max77693: Use proper regmap for handling MUIC interrupts
Interrupts coming from Maxim77693 MUIC block (MicroUSB Interface
Controller) were not handled at all because wrong regmap was used for
MUIC's regmap_irq_chip.

The MUIC component of Maxim 77693 uses different I2C address thus second
regmap is created and used by max77693 extcon driver. The registers for
MUIC interrupts are also in that block and should be handled by that
second regmap.

However the regmap irq chip for MUIC was configured with default regmap
which could not read MUIC registers.

Signed-off-by: Krzysztof Kozlowski <>
Cc: <>
Fixes: 342d669c1ee4 ("mfd: max77693: Handle IRQs using regmap")
drivers/mfd/max77693.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c
index 2277a11b6629..4b54da1ff7ab 100644
--- a/drivers/mfd/max77693.c
+++ b/drivers/mfd/max77693.c
@@ -243,7 +243,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c,
goto err_irq_charger;

- ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
+ ret = regmap_add_irq_chip(max77693->regmap_muic, max77693->irq,

 \ /
  Last update: 2014-10-10 11:02    [W:0.046 / U:6.800 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site