lkml.org 
[lkml]   [2014]   [Oct]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] ARM: tegra: venice2: add GK20A GPU DT node
On 10/08/2014 11:11 PM, Alexandre Courbot wrote:
> From: Thierry Reding <treding@nvidia.com>
>
> Add the device-tree node for the GK20A GPU and leave it disabled by
> default. It is the responsability of the bootloader to enable it if the
> VPR registers have been programmed such as the GPU can operate.

> diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts

> + gpu@0,57000000 {
> + status = "disabled";

status="disabled" usually goes into tegra124.dtsi. A board would only
override status to "okay" if necessary, and include any board specific
properties ...

> + vdd-supply = <&vdd_gpu>;

... such as that.


\
 
 \ /
  Last update: 2014-10-10 07:44    [W:0.089 / U:0.692 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site