lkml.org 
[lkml]   [2014]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v4 1/5] mfd: omap-usb-host: Update DT clock binding information
Date
On Wednesday 08 January 2014 15:57:19 Roger Quadros wrote:
> It is a clock gate defined like so in the DT clock data
>
> on OMAP4
> init_60m_fclk: init_60m_fclk {
> #clock-cells = <0>;
> compatible = "ti,divider-clock";
> clocks = <&dpll_usb_m2_ck>;
> reg = <0x0104>;
> ti,dividers = <1>, <8>;
> };
>
> on OMAP5
> l3init_60m_fclk: l3init_60m_fclk {
> #clock-cells = <0>;
> compatible = "ti,divider-clock";
> clocks = <&dpll_usb_m2_ck>;
> reg = <0x0104>;
> ti,dividers = <1>, <8>;
> };
>
> So you can see that it is the same thing with a different name.

Right, but init_60m_fclk is the name of the clock output of the
divider here, which is /not/ what you should put in the "clock-names"
property of the consumer. The clock input name should reflect what
the clock is used for instead.

Arnd


\
 
 \ /
  Last update: 2014-01-08 12:41    [W:2.079 / U:0.144 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site