lkml.org 
[lkml]   [2014]   [Jan]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/3] irqchip: orion: clear bridge cause register on init
Date
It is good practice to mask and clear pending irqs on init. We already
mask all irqs, so also clear the bridge irq cause register.

Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
---
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
drivers/irqchip/irq-orion.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/irqchip/irq-orion.c b/drivers/irqchip/irq-orion.c
index e51d40031884..4137c3d15284 100644
--- a/drivers/irqchip/irq-orion.c
+++ b/drivers/irqchip/irq-orion.c
@@ -180,8 +180,9 @@ static int __init orion_bridge_irq_init(struct device_node *np,
gc->chip_types[0].chip.irq_mask = irq_gc_mask_clr_bit;
gc->chip_types[0].chip.irq_unmask = irq_gc_mask_set_bit;

- /* mask all interrupts */
+ /* mask and clear all interrupts */
writel(0, gc->reg_base + ORION_BRIDGE_IRQ_MASK);
+ writel(0, gc->reg_base + ORION_BRIDGE_IRQ_CAUSE);

irq_set_handler_data(irq, domain);
irq_set_chained_handler(irq, orion_bridge_irq_handler);
--
1.8.5.2


\
 
 \ /
  Last update: 2014-01-24 00:01    [W:0.118 / U:1.248 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site