lkml.org 
[lkml]   [2014]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectADC continous mode
Date
Hi experts,
i am new to this area,
I am using amstrong 3.8.13 kernel in BBB
at first i loaded the device tree as below,

echo cape-bone-iio > /sys/devices/bone_capemgr.*/slots

then i used analog pins however i am getting the fixed values that is values
are not varying continously as i vary input analog voltage

if i go to this path
/sys/devices/ocp.2/44e0d000.tscadc/tiadc/iio:device0

and then ls -al gives me

total 0
drwxr-xr-x 3 root root 0 Jan 1 03:24 .
drwxr-xr-x 4 root root 0 Jan 1 03:24 ..
-r--r--r-- 1 root root 4096 Jan 1 03:27 dev
-rw-r--r-- 1 root root 4096 Jan 1 03:27 in_voltage0_raw
-rw-r--r-- 1 root root 4096 Jan 1 03:27 in_voltage1_raw
-rw-r--r-- 1 root root 4096 Jan 1 03:27 in_voltage2_raw
-rw-r--r-- 1 root root 4096 Jan 1 03:27 in_voltage3_raw
-rw-r--r-- 1 root root 4096 Jan 1 03:27 in_voltage4_raw
-rw-r--r-- 1 root root 4096 Jan 1 03:27 in_voltage5_raw
-rw-r--r-- 1 root root 4096 Jan 1 03:27 in_voltage6_raw
-rw-r--r-- 1 root root 4096 Jan 1 03:27 in_voltage7_raw
-r--r--r-- 1 root root 4096 Jan 1 03:25 name
drwxr-xr-x 2 root root 0 Jan 1 03:27 power
lrwxrwxrwx 1 root root 0 Jan 1 03:27 subsystem -> ../../../../../bus/iio
-rw-r--r-- 1 root root 4096 Jan 1 03:24 uevent

there is no mode directory and buffer directory in list . please help to
configure ADC In continous mode.

Thanks
shravankumar



\
 
 \ /
  Last update: 2014-01-22 13:01    [W:0.052 / U:0.556 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site