Messages in this thread | | | From | Yann Cantin <> | Subject | [PATCH 0/2] new USB eBeam input driver | Date | Fri, 16 Aug 2013 22:25:41 +0200 |
| |
Hi,
New USB input driver for eBeam devices.
Currently supported (tested) : - Luidia eBeam classic projection and edge projection models - Nec "interactive solution" NP01Wi1 & NP01Wi2 accessories.
From basic usb point of view, all these devices are indistinguishable : they have the same usb ids and (blank) hid report descriptors. There's other re-branded hardware that need to be test, but i bet on same ids.
Patch 1 to blacklist the devices for hid generic-usb.
Patch 2 is the actual driver.
Notable stuff : - use div64_s64 for portable 64/64-bits divisions. - 13 sysfs custom files : 9 values for the transformation matrix, 4 for xy ranges and a calibration trigger.
The module run fine since 3.3.6 kernel, both x86_32 and 64, actually run in production on a 3.8.13 and compile without errors on today's linus tree.
Side note : - This driver was first submit and discuss last year.
Thanks for your help.
| |