lkml.org 
[lkml]   [2013]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4] regulator: palmas: model SMPS10 as two regulators
Date
SMPS10 has two outputs OUT1 and OUT2 and have one input IN1.
SMPS10-OUT2 is connected to SMPS10-IN1 and can be configured either
in BOOST mode or BYPASS mode. regulator_enable of SMPS10-OUT2 configures
it in BOOST mode. For BYPASS mode regulator_allow_bypass() API can be
used. SMPS10-OUT1 is connected to SMPS10-OUT2 and can be enabled using
regulator_enable().

[ axel.lin@ingics.com : Simplify regulator_desc setting for SMPS10_[OUT1|OUT2]

Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
Changes from v3:
rolled in Axel's fix.
rebased to Linux 3.11-rc5

Changes from v2:
Fixed the compilation error.
drivers/regulator/palmas-regulator.c: In function 'palmas_regulators_probe':
drivers/regulator/palmas-regulator.c:850:8: error: 'PALMAS_REG_SMPS10'
undeclared (first use in this function)
case PALMAS_REG_SMPS10:
^
Changes from v1:
Reversed the order of SMPS10_OUT2 and SMPS10_OUT1 since the input signal
of OUT1 is OUT2

drivers/regulator/palmas-regulator.c | 30 ++++++++++++++++++++++++------
include/linux/mfd/palmas.h | 9 +++++----
2 files changed, 29 insertions(+), 10 deletions(-)

diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c
index d0c8785..ab58e95 100644
--- a/drivers/regulator/palmas-regulator.c
+++ b/drivers/regulator/palmas-regulator.c
@@ -97,11 +97,16 @@ static const struct regs_info palmas_regs_info[] = {
.ctrl_addr = PALMAS_SMPS9_CTRL,
},
{
- .name = "SMPS10",
+ .name = "SMPS10_OUT2",
.sname = "smps10-in",
.ctrl_addr = PALMAS_SMPS10_CTRL,
},
{
+ .name = "SMPS10_OUT1",
+ .sname = "smps10-out2",
+ .ctrl_addr = PALMAS_SMPS10_CTRL,
+ },
+ {
.name = "LDO1",
.sname = "ldo1-in",
.vsel_addr = PALMAS_LDO1_VOLTAGE,
@@ -487,6 +492,8 @@ static struct regulator_ops palmas_ops_smps10 = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
+ .set_bypass = regulator_set_bypass_regmap,
+ .get_bypass = regulator_get_bypass_regmap,
};

static int palmas_is_enabled_ldo(struct regulator_dev *dev)
@@ -538,7 +545,8 @@ static int palmas_smps_init(struct palmas *palmas, int id,
return ret;

switch (id) {
- case PALMAS_REG_SMPS10:
+ case PALMAS_REG_SMPS10_OUT1:
+ case PALMAS_REG_SMPS10_OUT2:
reg &= ~PALMAS_SMPS10_CTRL_MODE_SLEEP_MASK;
if (reg_init->mode_sleep)
reg |= reg_init->mode_sleep <<
@@ -681,7 +689,8 @@ static struct of_regulator_match palmas_matches[] = {
{ .name = "smps7", },
{ .name = "smps8", },
{ .name = "smps9", },
- { .name = "smps10", },
+ { .name = "smps10_out2", },
+ { .name = "smps10_out1", },
{ .name = "ldo1", },
{ .name = "ldo2", },
{ .name = "ldo3", },
@@ -838,7 +847,8 @@ static int palmas_regulators_probe(struct platform_device *pdev)
continue;
ramp_delay_support = true;
break;
- case PALMAS_REG_SMPS10:
+ case PALMAS_REG_SMPS10_OUT1:
+ case PALMAS_REG_SMPS10_OUT2:
if (!PALMAS_PMIC_HAS(palmas, SMPS10_BOOST))
continue;
}
@@ -872,7 +882,8 @@ static int palmas_regulators_probe(struct platform_device *pdev)
pmic->desc[id].id = id;

switch (id) {
- case PALMAS_REG_SMPS10:
+ case PALMAS_REG_SMPS10_OUT1:
+ case PALMAS_REG_SMPS10_OUT2:
pmic->desc[id].n_voltages = PALMAS_SMPS10_NUM_VOLTAGES;
pmic->desc[id].ops = &palmas_ops_smps10;
pmic->desc[id].vsel_reg =
@@ -882,7 +893,14 @@ static int palmas_regulators_probe(struct platform_device *pdev)
pmic->desc[id].enable_reg =
PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
PALMAS_SMPS10_CTRL);
- pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
+ if (id == PALMAS_REG_SMPS10_OUT1)
+ pmic->desc[id].enable_mask = SMPS10_SWITCH_EN;
+ else
+ pmic->desc[id].enable_mask = SMPS10_BOOST_EN;
+ pmic->desc[id].bypass_reg =
+ PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
+ PALMAS_SMPS10_CTRL);
+ pmic->desc[id].bypass_mask = SMPS10_BYPASS_EN;
pmic->desc[id].min_uV = 3750000;
pmic->desc[id].uV_step = 1250000;
break;
diff --git a/include/linux/mfd/palmas.h b/include/linux/mfd/palmas.h
index 1a8dd7a..c06d78a 100644
--- a/include/linux/mfd/palmas.h
+++ b/include/linux/mfd/palmas.h
@@ -160,7 +160,8 @@ enum palmas_regulators {
PALMAS_REG_SMPS7,
PALMAS_REG_SMPS8,
PALMAS_REG_SMPS9,
- PALMAS_REG_SMPS10,
+ PALMAS_REG_SMPS10_OUT2,
+ PALMAS_REG_SMPS10_OUT1,
/* LDO regulators */
PALMAS_REG_LDO1,
PALMAS_REG_LDO2,
@@ -355,9 +356,9 @@ struct palmas_pmic {
int smps123;
int smps457;

- int range[PALMAS_REG_SMPS10];
- unsigned int ramp_delay[PALMAS_REG_SMPS10];
- unsigned int current_reg_mode[PALMAS_REG_SMPS10];
+ int range[PALMAS_REG_SMPS10_OUT1];
+ unsigned int ramp_delay[PALMAS_REG_SMPS10_OUT1];
+ unsigned int current_reg_mode[PALMAS_REG_SMPS10_OUT1];
};

struct palmas_resource {
--
1.7.10.4


\
 
 \ /
  Last update: 2013-08-12 11:21    [W:0.374 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site