lkml.org 
[lkml]   [2013]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/1] USB-Serial: Fix error handling of usb_wwan
Date
This fixes an issue where the bulk-in urb used for incoming data transfer
is not resubmitted if the packet recieved contains an error status. This
results in the driver locking until the port is closed and re-opened.

Tested on a custom board with a Cinterion GSM module.

Signed-off-by: Matt Burtch <matt@grid-net.com>
---
drivers/usb/serial/usb_wwan.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/usb/serial/usb_wwan.c b/drivers/usb/serial/usb_wwan.c
index 8257d30..9eefc33 100644
--- a/drivers/usb/serial/usb_wwan.c
+++ b/drivers/usb/serial/usb_wwan.c
@@ -291,18 +291,18 @@ static void usb_wwan_indat_callback(struct urb *urb)
tty_flip_buffer_push(&port->port);
} else
dev_dbg(dev, "%s: empty read urb received\n", __func__);
-
- /* Resubmit urb so we continue receiving */
- err = usb_submit_urb(urb, GFP_ATOMIC);
- if (err) {
- if (err != -EPERM) {
- dev_err(dev, "%s: resubmit read urb failed. (%d)\n", __func__, err);
- /* busy also in error unless we are killed */
- usb_mark_last_busy(port->serial->dev);
- }
- } else {
+ }
+ /* Resubmit urb so we continue receiving */
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err) {
+ if (err != -EPERM) {
+ dev_err(dev, "%s: resubmit read urb failed. (%d)\n",
+ __func__, err);
+ /* busy also in error unless we are killed */
usb_mark_last_busy(port->serial->dev);
}
+ } else {
+ usb_mark_last_busy(port->serial->dev);
}
}

--
1.7.9.5


\
 
 \ /
  Last update: 2013-08-12 19:41    [W:0.028 / U:0.744 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site