lkml.org 
[lkml]   [2013]   [Aug]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: Enable arm_global_timer for Zynq brakes boot
On Mon, Aug 12, 2013 at 06:08:46PM +0200, Daniel Lezcano wrote:
> On 08/12/2013 06:03 PM, Sören Brinkmann wrote:
> > On Fri, Aug 09, 2013 at 10:27:57AM -0700, Stephen Boyd wrote:
> >> On 08/09, Daniel Lezcano wrote:
> >>>
> >>> yes, but at least the broadcast mechanism should send an IPI to cpu0 to
> >>> wake it up, no ? As Stephen stated this kind of configuration should has
> >>> never been tested before so the tick broadcast code is not handling this
> >>> case properly IMHO.
> >>>
> >>
> >> If you have a per-cpu tick device that isn't suffering from
> >> FEAT_C3_STOP why wouldn't you use that for the tick versus a
> >> per-cpu tick device that has FEAT_C3_STOP? It sounds like there
> >> is a bug in the preference logic or you should boost the rating
> >> of the arm global timer above the twd. Does this patch help? It
> >> should make the arm global timer the tick device and whatever the
> >> cadence timer you have into the broadcast device.
> >
> > I finally got to test your patch. Unfortunately, it makes the system
> > hang even earlier:
>
> [ ... ]
>
> Can you boot with maxcpus=1 and then give the result of timer_list ?

That doesn't seem to help anymore. It hangs too. Same picture w/ and w/o
'maxcpus', except for
[ 0.000000] Kernel command line: console=ttyPS0,115200 earlyprintk maxcpus=1


Sören


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-08-12 18:41    [W:0.095 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site