Messages in this thread Patch in this message | | | From | Alexandre Belloni <> | Subject | [PATCHv3 5/8] ARM: mxs: dt: cfa10037: make hogpins grabbed by respective drivers | Date | Fri, 28 Jun 2013 15:02:54 +0200 |
| |
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> --- arch/arm/boot/dts/imx28-cfa10037.dts | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/imx28-cfa10037.dts b/arch/arm/boot/dts/imx28-cfa10037.dts index c2ef3a3..182b99f 100644 --- a/arch/arm/boot/dts/imx28-cfa10037.dts +++ b/arch/arm/boot/dts/imx28-cfa10037.dts @@ -22,13 +22,19 @@ apb@80000000 { apbh@80000000 { pinctrl@80018000 { - pinctrl-names = "default", "default"; - pinctrl-1 = <&hog_pins_cfa10037>; - - hog_pins_cfa10037: hog-10037@0 { + usb_pins_cfa10037: usb-10037@0 { reg = <0>; fsl,pinmux-ids = < 0x0073 /* MX28_PAD_GPMI_D7__GPIO_0_7 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + mac0_pins_cfa10037: mac0-10037@0 { + reg = <0>; + fsl,pinmux-ids = < 0x2153 /* MX28_PAD_SSP2_D5__GPIO_2_21 */ >; fsl,drive-strength = <0>; @@ -56,7 +62,8 @@ mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; - pinctrl-0 = <&mac0_pins_a>; + pinctrl-0 = <&mac0_pins_a + &mac0_pins_cfa10037>; phy-reset-gpios = <&gpio2 21 0>; phy-reset-duration = <100>; status = "okay"; @@ -68,6 +75,8 @@ reg_usb1_vbus: usb1_vbus { compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins_cfa10037>; regulator-name = "usb1_vbus"; regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; -- 1.8.1.2
| |