lkml.org 
[lkml]   [2013]   [Jun]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v4 20/20] ext4: Allow punch hole with bigalloc enabled
----- Original Message -----
> On Fri, 31 May 2013, Theodore Ts'o wrote:
>
> > Date: Fri, 31 May 2013 11:14:54 -0400
> > From: Theodore Ts'o <tytso@mit.edu>
> > To: Lukas Czerner <lczerner@redhat.com>
> > Cc: linux-mm@kvack.org, linux-kernel@vger.kernel.org,
> > linux-fsdevel@vger.kernel.org, linux-ext4@vger.kernel.org,
> > akpm@linux-foundation.org, hughd@google.com
> > Subject: Re: [PATCH v4 20/20] ext4: Allow punch hole with bigalloc enabled
> >
> > On Tue, May 14, 2013 at 06:37:34PM +0200, Lukas Czerner wrote:
> > > In commits 5f95d21fb6f2aaa52830e5b7fb405f6c71d3ab85 and
> > > 30bc2ec9598a1b156ad75217f2e7d4560efdeeab we've reworked punch_hole
> > > implementation and there is noting holding us back from using punch hole
> > > on file system with bigalloc feature enabled.
> > >
> > > This has been tested with fsx and xfstests.
> > >
> > > Signed-off-by: Lukas Czerner <lczerner@redhat.com>
> > > Reviewed-by: Jan Kara <jack@suse.cz>
> >
> > This patch is causing a test failure with bigalloc enabled with the
> > xfstests shared/298.
> >
> > Since it's at the end of the invalidate page range tests, I'm going to
> > drop this patch for now. Could you take a look at this?
> >
> > Thanks!!
> >
> > - Ted
>
> Hi Ted,
>
> I should have really noticed this earlier. This test (shared/298)
> have nothing to do with bigalloc, nor punch hole. It tests file
> system discard implementation.
>
> The most likely reason it failed for you is that the tests does not
> count with bigalloc feature. However it seems to be working for me
> without any problems. Can you provide more information about the
> problem you've seen, or at least your xfstest configuration so we
> can see what went wrong and possibly fix the test ?

You are right, the test doesn't count with bigalloc. I was able to trigger the test failure by using MKFS_OPTIONS="-O bigalloc -C 8192"

If I understood it correctly, the dumpe2fs outputs free blocks even if bigalloc is used, that is only the first block of the cluster. I changed the test to count with whole cluster. Please try the following patch to the xfstests if it helps you. I tried different cluster sizes from 8192 to 65536 and it works for me.

Thank you!
Tom

http://www.fi.muni.cz/~xracek/0001-xfstests-298-fix-failure-on-ext4-with-bigalloc.patch



From ccf4cb26505c3e64ef1bfb1264a17ed840a03a81 Mon Sep 17 00:00:00 2001
From: Tomas Racek <tracek@redhat.com>
Date: Tue, 18 Jun 2013 13:45:50 +0200
Subject: [PATCH] xfstests: 298: fix failure on ext4 with bigalloc

Count with cluster size instead of block size if bigalloc is used.

Signed-off-by: Tomas Racek <tracek@redhat.com>
---
tests/shared/298 | 13 ++++++++++---
1 file changed, 10 insertions(+), 3 deletions(-)

diff --git a/tests/shared/298 b/tests/shared/298
index 4541798..78a229d 100755
--- a/tests/shared/298
+++ b/tests/shared/298
@@ -56,14 +56,21 @@ get_free_sectors()
{
case $FSTYP in
ext4)
+ cluster_size=$($DUMPE2FS_PROG $img_file 2>&1 | sed -n 's/Cluster size: *\(.*\)/\1/p')
+ if [ -n "$cluster_size" ]; then
+ blocks_per_cluster=`expr $cluster_size / $block_size`
+ else
+ blocks_per_cluster=1
+ fi
+
$DUMPE2FS_PROG $img_file 2>&1 | grep " Free blocks" | cut -d ":" -f2- | \
tr ',' '\n' | $SED_PROG 's/^ //' | \
- $AWK_PROG -v spb=$sectors_per_block 'BEGIN{FS="-"};
+ $AWK_PROG -v spb=$sectors_per_block -v bpc=$blocks_per_cluster 'BEGIN{FS="-"};
NF {
if($2 != "") # range of blocks
- print spb * $1, spb * ($2 + 1) - 1;
+ print spb * $1, spb * ($2 + bpc) - 1;
else # just single block
- print spb * $1, spb * ($1 + 1) - 1;
+ print spb * $1, spb * ($1 + bpc) - 1;
}'
;;
xfs)
--
1.7.11.7

>
> Tom can you take a look at this ? (Adding Tomas Racek to the CC)
>
> So, since this failure is not really related to the patch itself,
> can we re-include the patch (it might be already too late I guess).
>
> Thanks!
> -Lukas
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>


\
 
 \ /
  Last update: 2013-06-18 15:21    [W:3.515 / U:1.568 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site