Messages in this thread Patch in this message | | | From | Kishon Vijay Abraham I <> | Subject | [PATCH] regulator: palmas: Fix "enable_reg" to point to the correct reg for SMPS10 | Date | Thu, 30 May 2013 15:55:09 +0530 |
| |
regulator_enable_regmap() uses enable_reg to enable the regulator. But enable_reg for smps10 points to SMPS10_STATUS which is a read-only register. Fixed the same by having enable_reg set to SMPS10_CTRL.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com> --- drivers/regulator/palmas-regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/regulator/palmas-regulator.c b/drivers/regulator/palmas-regulator.c index 92ceed0..87d4f13 100644 --- a/drivers/regulator/palmas-regulator.c +++ b/drivers/regulator/palmas-regulator.c @@ -878,7 +878,7 @@ static int palmas_regulators_probe(struct platform_device *pdev) pmic->desc[id].vsel_mask = SMPS10_VSEL; pmic->desc[id].enable_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE, - PALMAS_SMPS10_STATUS); + PALMAS_SMPS10_CTRL); pmic->desc[id].enable_mask = SMPS10_BOOST_EN; pmic->desc[id].min_uV = 3750000; pmic->desc[id].uV_step = 1250000; -- 1.7.10.4
| |