lkml.org 
[lkml]   [2013]   [May]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] ARM: OMAP4: USB_EHCI_HCD needs USB_PHY and NOP_USB_XCEIV
Date
On Tuesday 28 May 2013 11:14:37 Roger Quadros wrote:
> >> depends on USB_ARCH_HAS_EHCI
> >> + select USB_PHY if ARCH_OMAP4
> >> + select NOP_USB_XCEIV if ARCH_OMAP4
> >> ---help---
> >> The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
> >> "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
> >
> > 'select'ing USB_PHY sounds wrong too, I think you mean 'depends on'.
> >
> > Also note that Roger Quadros has just removed the 'select NOP_USB_XCEIV'
> > there, I think you should coordinate with him.
>
> Selecting NOP_USB_XCEIV is wrong as it in turn depends on USB_PHY.
>
> I'm not for depends as it would hide USB_EHCI_HCD_OMAP in menuconfig.
> I'm for explicitly selecting both, as it makes the user's life much easier.
> But I'm afraid maintainers might object to that.

My preferred option would be to turn the 'menuconfig PHY' into 'menu',
which is what we did to solve a similar problem in drivers/mfd: It lets
us 'select' specific PHY drivers without turning on the entire
menu. Using 'select PHY' has the nasty side-effect of creating an
incorrect dependency between the OMAP EHCI driver and all the
non-OMAP phy drivers that become visible once the usb-phy directory
gets enabled.

Arnd


\
 
 \ /
  Last update: 2013-05-28 11:21    [W:0.069 / U:1.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site