lkml.org 
[lkml]   [2013]   [May]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
Subjectata1.00: failed to enable AA (error_mask=0x1)
Hello,

Please advise if you can help me with bellow problem. I receive the
following messages on boot:

May 25 01:52:37 Leny kernel: ata1.00: failed to enable AA (error_mask=0x1)
May 25 01:52:37 Leny kernel: ata1.00: ATA-8: ST500LM012 HN-M500MBB,
2AR10001, max UDMA/100
May 25 01:52:37 Leny kernel: ata1.00: 976773168 sectors, multi 0: LBA48
NCQ (depth 31/32)
May 25 01:52:37 Leny kernel: ata1.00: failed to enable AA (error_mask=0x1)
May 25 01:52:37 Leny kernel: ata1.00: configured for UDMA/100
May 25 01:52:37 Leny kernel: scsi 0:0:0:0: Direct-Access ATA
ST500LM012 HN-M5 2AR1 PQ: 0 ANSI: 5

lspci shows the following:

00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset
Family 6 port SATA AHCI Controller (rev 05)
Subsystem: Lenovo Device 3975
Kernel driver in use: ahci
Kernel modules: ahci

I have read topics varying from "it's nothing" to "your HDD will fail
soon", so I really do not know what is this.

Please cc me in the reply if you can. Thank you very much.



\
 
 \ /
  Last update: 2013-05-25 02:21    [W:0.021 / U:4.244 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site