lkml.org 
[lkml]   [2013]   [May]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] ARM: ux500: Remove unnecessary attributes from DMA channel request pdata
Date
DMA data width and packet size information is only required at channel
configuration time. Any information passed from platform data is passed
directly to the DMA40 driver to use during channel allocation, but these
pieces of information are subsequently ignored by the driver, so we may
as well remove them.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
arch/arm/mach-ux500/usb.c | 8 --------
1 file changed, 8 deletions(-)

diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c
index e0ea490..821703d 100644
--- a/arch/arm/mach-ux500/usb.c
+++ b/arch/arm/mach-ux500/usb.c
@@ -15,19 +15,11 @@
#define MUSB_DMA40_RX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
.dir = STEDMA40_PERIPH_TO_MEM, \
- .src_info.data_width = STEDMA40_WORD_WIDTH, \
- .dst_info.data_width = STEDMA40_WORD_WIDTH, \
- .src_info.psize = STEDMA40_PSIZE_LOG_16, \
- .dst_info.psize = STEDMA40_PSIZE_LOG_16, \
}

#define MUSB_DMA40_TX_CH { \
.mode = STEDMA40_MODE_LOGICAL, \
.dir = STEDMA40_MEM_TO_PERIPH, \
- .src_info.data_width = STEDMA40_WORD_WIDTH, \
- .dst_info.data_width = STEDMA40_WORD_WIDTH, \
- .src_info.psize = STEDMA40_PSIZE_LOG_16, \
- .dst_info.psize = STEDMA40_PSIZE_LOG_16, \
}

static struct stedma40_chan_cfg musb_dma_rx_ch[UX500_MUSB_DMA_NUM_RX_CHANNELS]
--
1.7.10.4


\
 
 \ /
  Last update: 2013-05-02 11:21    [W:0.056 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site