Messages in this thread Patch in this message | | | Subject | [PATCH] Blackfin: bf537: rename "CONFIG_ADT7410" | From | Paul Bolle <> | Date | Mon, 13 May 2013 23:15:43 +0200 |
| |
In v3.10-rc1 the Analog Devices ADT7310/ADT7410 temperature sensor driver was removed as an IIO driver. But it was apparently overlooked to rename four references to CONFIG_ADT7410 to either CONFIG_SENSORS_ADT7310 or CONFIG_SENSORS_ADT7410. Do so now. Use the IS_ENABLED() macro, while we're at it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> --- 0) Untested. The choice for SENSORS_ADT7310 and SENSORS_ADT7410 is just educated guesswork.
1) It was commit cddc1424f39e7c04045a6431eaf13a003fb8335a ("staging:iio: Remove adt7410 driver") that triggered this patch.
arch/blackfin/mach-bf537/boards/stamp.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 1cbe46e..90d2ab1 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -701,7 +701,7 @@ static struct bfin5xx_spi_chip ad7816_spi_chip_info = { }; #endif -#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE) +#if IS_ENABLED(CONFIG_SENSORS_ADT7310) static unsigned long adt7310_platform_data[3] = { /* INT bound temperature alarm event. line 1 */ IRQ_PG4, IRQF_TRIGGER_LOW, @@ -1063,7 +1063,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { }, #endif -#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE) +#if IS_ENABLED(CONFIG_SENSORS_ADT7310) { .modalias = "adt7310", .max_speed_hz = 1000000, @@ -2161,7 +2161,7 @@ static struct platform_device ad5398_userspace_consumer_device = { #endif #endif -#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE) +#if IS_ENABLED(CONFIG_SENSORS_ADT7410) /* INT bound temperature alarm event. line 1 */ static unsigned long adt7410_platform_data[2] = { IRQ_PG4, IRQF_TRIGGER_LOW, @@ -2229,7 +2229,7 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif -#if defined(CONFIG_ADT7410) || defined(CONFIG_ADT7410_MODULE) +#if IS_ENABLED(CONFIG_SENSORS_ADT7410) { I2C_BOARD_INFO("adt7410", 0x48), /* CT critical temperature event. line 0 */ -- 1.7.11.7
| |