lkml.org 
[lkml]   [2013]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 06/15] powerpc/85xx: add support to JOG feature using cpufreq interface
On Mon, Apr 22, 2013 at 08:55:35AM +0530, Viresh Kumar wrote:
> On Fri, Apr 19, 2013 at 4:17 PM, Zhao Chenhui
> <chenhui.zhao@freescale.com> wrote:
> > diff --git a/drivers/cpufreq/mpc85xx-cpufreq.c b/drivers/cpufreq/mpc85xx-cpufreq.c
>
> > +#include <linux/module.h>
> > +#include <linux/cpufreq.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/suspend.h>
> > +#include <linux/cpu.h>
> > +#include <linux/time.h>
> > +#include <linux/io.h>
> > +#include <linux/smp.h>
>
> Would be better to keep them in alphabetical order, so that we don't add
> anything twice.

Good idea.

>
> > +static int mpc85xx_cpufreq_cpu_init(struct cpufreq_policy *policy)
> > +{
> > + unsigned int i, cur_pll;
> > + int hw_cpu = get_hard_smp_processor_id(policy->cpu);
> > +
> > + if (!cpu_present(policy->cpu))
>
> This can't happen and so no need to check it.
>
> > + return -ENODEV;
> > +
> > + /* the latency of a transition, the unit is ns */
> > + policy->cpuinfo.transition_latency = 2000;
> > +
> > + cur_pll = get_pll(hw_cpu);
> > +
> > + /* initialize frequency table */
> > + pr_debug("core%d frequency table:\n", hw_cpu);
> > + for (i = 0; mpc85xx_freqs[i].frequency != CPUFREQ_TABLE_END; i++) {
> > + if (mpc85xx_freqs[i].index <= max_pll[hw_cpu]) {
> > + /* The frequency unit is kHz. */
> > + mpc85xx_freqs[i].frequency =
> > + (sysfreq * mpc85xx_freqs[i].index / 2) / 1000;
> > + } else {
> > + mpc85xx_freqs[i].frequency = CPUFREQ_ENTRY_INVALID;
> > + }
> > +
> > + pr_debug("%d: %dkHz\n", i, mpc85xx_freqs[i].frequency);
> > +
> > + if (mpc85xx_freqs[i].index == cur_pll)
> > + policy->cur = mpc85xx_freqs[i].frequency;
> > + }
> > + pr_debug("current pll is at %d, and core freq is%d\n",
> > + cur_pll, policy->cur);
> > +
> > + cpufreq_frequency_table_get_attr(mpc85xx_freqs, policy->cpu);
> > +
> > + /*
> > + * This ensures that policy->cpuinfo_min
> > + * and policy->cpuinfo_max are set correctly.
> > + */
> > + return cpufreq_frequency_table_cpuinfo(policy, mpc85xx_freqs);
>
> Call cpufreq_frequency_table_get_attr() at the end after above call is
> successful.
>
> > +}
>
> > +static int mpc85xx_cpufreq_target(struct cpufreq_policy *policy,
> > + unsigned int target_freq,
> > + unsigned int relation)
>
> merge above two lines.
>
> > +{
> > + struct cpufreq_freqs freqs;
> > + unsigned int new;
> > + int ret = 0;
> > +
> > + if (!set_pll)
> > + return -ENODEV;
> > +
> > + cpufreq_frequency_table_target(policy,
> > + mpc85xx_freqs,
> > + target_freq,
> > + relation,
> > + &new);
>
> same.. merge all above to put it in a single line.
>
> > + freqs.old = policy->cur;
> > + freqs.new = mpc85xx_freqs[new].frequency;
> > + freqs.cpu = policy->cpu;
>
> not required now.
>
> > + mutex_lock(&mpc85xx_switch_mutex);
> > + cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
>
> ditto. Rebase over latest code from linux-next. This call has changed.
>
> > + ret = set_pll(policy->cpu, mpc85xx_freqs[new].index);
> > + if (!ret) {
> > + pr_info("cpufreq: Setting core%d frequency to %d kHz and PLL ratio to %d:2\n",
> > + policy->cpu, mpc85xx_freqs[new].frequency,
> > + mpc85xx_freqs[new].index);
> > +
> > + ppc_proc_freq = freqs.new * 1000ul;
> > + }
> > + cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
> > + mutex_unlock(&mpc85xx_switch_mutex);
> > +
> > + return ret;
> > +}
>
> > +static int __init mpc85xx_jog_init(void)
> > +{
> > + struct device_node *np;
> > + unsigned int svr;
> > +
> > + np = of_find_matching_node(NULL, mpc85xx_jog_ids);
> > + if (!np)
> > + return -ENODEV;
> > +
> > + guts = of_iomap(np, 0);
> > + if (!guts) {
> > + of_node_put(np);
> > + return -ENODEV;
> > + }
> > +
> > + sysfreq = fsl_get_sys_freq();
> > +
> > + if (of_device_is_compatible(np, "fsl,mpc8536-guts")) {
> > + svr = mfspr(SPRN_SVR);
> > + if ((svr & 0x7fff) == 0x10) {
> > + pr_err("MPC8536 Rev 1.0 does not support cpufreq(JOG).\n");
> > + of_node_put(np);
>
> unmap too??
>
> > + return -ENODEV;
> > + }
> > + mpc85xx_freqs = mpc8536_freqs_table;
> > + set_pll = mpc8536_set_pll;
> > + max_pll[0] = get_pll(0);
> > +
> > + } else if (of_device_is_compatible(np, "fsl,p1022-guts")) {
> > + mpc85xx_freqs = p1022_freqs_table;
> > + set_pll = p1022_set_pll;
> > + max_pll[0] = get_pll(0);
> > + max_pll[1] = get_pll(1);
> > + }
> > +
> > + pr_info("Freescale MPC85xx cpufreq(JOG) driver\n");
> > +
> > + of_node_put(np);
> > + return cpufreq_register_driver(&mpc85xx_cpufreq_driver);
> > +}
> > +
> > +device_initcall(mpc85xx_jog_init);
>

Thanks. I will fix them.

-Chenhui



\
 
 \ /
  Last update: 2013-04-22 13:41    [W:0.623 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site