lkml.org 
[lkml]   [2013]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RESEND] video: mxsfb: Fix colors display on lower color depth
Hi Marek,

Le 22/04/2013 11:16, Marek Vasut a écrit :
> Dear Maxime Ripard,
>
>> The current code always registers as a 32 bits display, and uses the
>> hardware to drop the MSB of each color to abjust to the interface width
>> used by the panel.
>>
>> This results on 18 bits (and probably 16 bits display as well) in colors
>> being displayed poorly, because the MSB are obviously the most important
>> bits for each color definition.
>>
>> The default controller behaviour when using an interface width smaller
>> than the color depth is to drop the LSBs of each color, which makes more
>> sense because you lose the least important part of the color definition.
>>
>> So, to fix the colors display, just get back to the default controller
>> behaviour.
>>
>> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
>
> Did you receive my latest email? Check M28EVK (imx28-m28evk.dts), it uses 18bit
> LCD and works without this patch I think.

Thanks for the pointer. You mentionned in your other mail that it was
wired on 24bits but that the screen is actually 18 bits. I went to
search for the schematics to look at the wirings to see what could
differ, but I couldn't find any for the M28EVK. Are they publicly available?

Thanks,
Maxime

--
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2013-04-22 13:01    [W:0.055 / U:0.488 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site