lkml.org 
[lkml]   [2013]   [Apr]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH RESEND] video: mxsfb: Fix colors display on lower color depth
Date
Dear Maxime Ripard,

> The current code always registers as a 32 bits display, and uses the
> hardware to drop the MSB of each color to abjust to the interface width
> used by the panel.
>
> This results on 18 bits (and probably 16 bits display as well) in colors
> being displayed poorly, because the MSB are obviously the most important
> bits for each color definition.
>
> The default controller behaviour when using an interface width smaller
> than the color depth is to drop the LSBs of each color, which makes more
> sense because you lose the least important part of the color definition.
>
> So, to fix the colors display, just get back to the default controller
> behaviour.
>
> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

Did you receive my latest email? Check M28EVK (imx28-m28evk.dts), it uses 18bit
LCD and works without this patch I think.

Best regards,
Marek Vasut


\
 
 \ /
  Last update: 2013-04-22 11:41    [W:0.057 / U:1.348 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site