lkml.org 
[lkml]   [2013]   [Mar]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Subject[PATCH RFT v2] regulator: ab8500: Update info->update_val only when successfully update register
From
Date
Don't update info->update_val if write to the register fails.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
---
v2:
On the second thought, I think it's ok to update info->update_val when
regulator is disabled, the mode will change when the regulator is enabled.

Hi Bengt,
I just got your Ack for v1.
Can you review this v2 again, and let Mark know which version do you prefer.

Thanks.
Axel
drivers/regulator/ab8500.c | 27 +++++++++++++++++++--------
1 file changed, 19 insertions(+), 8 deletions(-)

diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 12e2740..7814ac3 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -182,8 +182,8 @@ static unsigned int ab8500_regulator_get_optimum_mode(
static int ab8500_regulator_set_mode(struct regulator_dev *rdev,
unsigned int mode)
{
- int ret = 0;
-
+ int ret;
+ u8 update_val;
struct ab8500_regulator_info *info = rdev_get_drvdata(rdev);

if (info == NULL) {
@@ -193,31 +193,42 @@ static int ab8500_regulator_set_mode(struct regulator_dev *rdev,

switch (mode) {
case REGULATOR_MODE_NORMAL:
- info->update_val = info->update_val_normal;
+ update_val = info->update_val_normal;
break;
case REGULATOR_MODE_IDLE:
- info->update_val = info->update_val_idle;
+ update_val = info->update_val_idle;
break;
default:
return -EINVAL;
}

+ /* ab8500 regulators share mode and enable in the same register bits.
+ off = 0b00
+ low power mode= 0b11
+ full powermode = 0b01
+ (HW control mode = 0b10)
+ Thus we don't write to the register when regulator is disabled.
+ */
if (info->is_enabled) {
ret = abx500_mask_and_set_register_interruptible(info->dev,
info->update_bank, info->update_reg,
- info->update_mask, info->update_val);
- if (ret < 0)
+ info->update_mask, update_val);
+ if (ret < 0) {
dev_err(rdev_get_dev(rdev),
"couldn't set regulator mode\n");
+ return ret;
+ }

dev_vdbg(rdev_get_dev(rdev),
"%s-set_mode (bank, reg, mask, value): "
"0x%x, 0x%x, 0x%x, 0x%x\n",
info->desc.name, info->update_bank, info->update_reg,
- info->update_mask, info->update_val);
+ info->update_mask, update_val);
}

- return ret;
+ info->update_val = update_val;
+
+ return 0;
}

static unsigned int ab8500_regulator_get_mode(struct regulator_dev *rdev)
--
1.7.10.4




\
 
 \ /
  Last update: 2013-03-28 11:01    [W:0.143 / U:0.120 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site