lkml.org 
[lkml]   [2013]   [Mar]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
Subject[ 062/104] USB: xhci: correctly enable interrupts
3.2-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hannes Reinecke <hare@suse.de>

commit 00eed9c814cb8f281be6f0f5d8f45025dc0a97eb upstream.

xhci has its own interrupt enabling routine, which will try to
use MSI-X/MSI if present. So the usb core shouldn't try to enable
legacy interrupts; on some machines the xhci legacy IRQ setting
is invalid.

v3: Be careful to not break XHCI_BROKEN_MSI workaround (by trenn)

Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: Thomas Renninger <trenn@suse.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Frederik Himpe <fhimpe@vub.ac.be>
Cc: David Haerdeman <david@hardeman.nu>
Cc: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
Reviewed-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
drivers/usb/core/hcd-pci.c | 23 ++++++++++++++---------
drivers/usb/host/xhci.c | 3 ++-
2 files changed, 16 insertions(+), 10 deletions(-)

--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -173,6 +173,7 @@ int usb_hcd_pci_probe(struct pci_dev *de
struct hc_driver *driver;
struct usb_hcd *hcd;
int retval;
+ int hcd_irq = 0;

if (usb_disabled())
return -ENODEV;
@@ -187,15 +188,19 @@ int usb_hcd_pci_probe(struct pci_dev *de
return -ENODEV;
dev->current_state = PCI_D0;

- /* The xHCI driver supports MSI and MSI-X,
- * so don't fail if the BIOS doesn't provide a legacy IRQ.
+ /*
+ * The xHCI driver has its own irq management
+ * make sure irq setup is not touched for xhci in generic hcd code
*/
- if (!dev->irq && (driver->flags & HCD_MASK) != HCD_USB3) {
- dev_err(&dev->dev,
- "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
- pci_name(dev));
- retval = -ENODEV;
- goto disable_pci;
+ if ((driver->flags & HCD_MASK) != HCD_USB3) {
+ if (!dev->irq) {
+ dev_err(&dev->dev,
+ "Found HC with no IRQ. Check BIOS/PCI %s setup!\n",
+ pci_name(dev));
+ retval = -ENODEV;
+ goto disable_pci;
+ }
+ hcd_irq = dev->irq;
}

hcd = usb_create_hcd(driver, &dev->dev, pci_name(dev));
@@ -245,7 +250,7 @@ int usb_hcd_pci_probe(struct pci_dev *de

pci_set_master(dev);

- retval = usb_add_hcd(hcd, dev->irq, IRQF_SHARED);
+ retval = usb_add_hcd(hcd, hcd_irq, IRQF_SHARED);
if (retval != 0)
goto unmap_registers;
set_hs_companion(dev, hcd);
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -342,7 +342,7 @@ static int xhci_try_enable_msi(struct us
* generate interrupts. Don't even try to enable MSI.
*/
if (xhci->quirks & XHCI_BROKEN_MSI)
- return 0;
+ goto legacy_irq;

/* unregister the legacy interrupt */
if (hcd->irq)
@@ -363,6 +363,7 @@ static int xhci_try_enable_msi(struct us
return -EINVAL;
}

+ legacy_irq:
/* fall back to legacy interrupt*/
ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED,
hcd->irq_descr, hcd);



\
 
 \ /
  Last update: 2013-03-25 02:41    [W:0.781 / U:0.236 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site