lkml.org 
[lkml]   [2013]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/7] ARM: tegra: update device trees for USB binding rework
On Wed, Mar 20, 2013 at 05:47:46PM +0530, Venu Byravarasu wrote:
> > -----Original Message-----
> > From: kishon [mailto:kishon@ti.com]
> > Sent: Wednesday, March 20, 2013 4:53 PM
> > To: Venu Byravarasu
> > Cc: gregkh@linuxfoundation.org; stern@rowland.harvard.edu;
> > balbi@ti.com; linux-usb@vger.kernel.org; linux-kernel@vger.kernel.org;
> > swarren@wwwdotorg.org; linux-tegra@vger.kernel.org; devicetree-
> > discuss@lists.ozlabs.org
> > Subject: Re: [PATCH 2/7] ARM: tegra: update device trees for USB binding
> > rework
> >
> > Hi,
> >
> > On Monday 18 March 2013 05:59 PM, Venu Byravarasu wrote:
> > > This patch updates all Tegra board files so that they contain all the
> > > properties required by the updated USB DT binding. Note that this patch
> > > only adds the new properties and does not yet remove the old properties,
> > > in order to maintain bisectability. The old properties will be removed
> > > once the driver has been updated to assume the new bindings.
> > >
> > > Signed-off-by: Venu Byravarasu <vbyravarasu@nvidia.com>
> > > ---
> > > arch/arm/boot/dts/tegra20-colibri-512.dtsi | 4 +++
> > > arch/arm/boot/dts/tegra20-harmony.dts | 8 +++---
> > > arch/arm/boot/dts/tegra20-iris-512.dts | 4 +++
> > > arch/arm/boot/dts/tegra20-paz00.dts | 8 +++---
> > > arch/arm/boot/dts/tegra20-seaboard.dts | 13 +++++++---
> > > arch/arm/boot/dts/tegra20-trimslice.dts | 12 +++++++---
> > > arch/arm/boot/dts/tegra20-ventana.dts | 7 +++--
> > > arch/arm/boot/dts/tegra20.dtsi | 32 +++++++++++++++++----------
> > > 8 files changed, 57 insertions(+), 31 deletions(-)
> > >
> > > diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
> > b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
> > > index cb73e62..af5a7ae 100644
> > > --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
> > > +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
> > > @@ -443,6 +443,10 @@
> > > nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
> > > };
> > >
> > > + usb-phy@c5004000 {
> > This node doesn't have a *reg* property. So "@c5004000" is not needed.
> > This comment applies to all the nodes which doesn't have *reg* property.
>
> Thanks Kishon for the comments.
> As I've 3 usb-phy DT nodes, how to differentiate between them if I remove this @Address ?

then add reg property :-)

--
balbi
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2013-03-20 14:01    [W:0.051 / U:1.636 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site