lkml.org 
[lkml]   [2013]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH 1/1]linux-usb: fix the idProduct value to be compatible with current CPU in initializers.c

From: fangxiaozhi <huananhu@huawei.com>

1. The idProduct is little endian, so make sure its value to be compatible with the current CPU. Make no break on big endian processors.

Signed-off-by: fangxiaozhi <huananhu@huawei.com>
--------------------------------------------------------------------
diff -uprN linux-3.8-rc6_orig/drivers/usb/storage/initializers.c linux-3.8-rc6/drivers/usb/storage/initializers.c
--- linux-3.8-rc6_orig/drivers/usb/storage/initializers.c 2013-02-06 14:48:51.564355283 +0800
+++ linux-3.8-rc6/drivers/usb/storage/initializers.c 2013-02-07 15:29:59.929482630 +0800
@@ -147,7 +147,7 @@ static int usb_stor_huawei_dongles_pid(s
int idProduct;

idesc = &us->pusb_intf->cur_altsetting->desc;
- idProduct = us->pusb_dev->descriptor.idProduct;
+ idProduct = le16_to_cpu(us->pusb_dev->descriptor.idProduct);
/* The first port is CDROM,
* means the dongle in the single port mode,
* and a switch command is required to be sent. */
@@ -169,7 +169,7 @@ int usb_stor_huawei_init(struct us_data
int result = 0;

if (usb_stor_huawei_dongles_pid(us)) {
- if (us->pusb_dev->descriptor.idProduct >= 0x1446)
+ if (le16_to_cpu(us->pusb_dev->descriptor.idProduct) >= 0x1446)
result = usb_stor_huawei_scsi_init(us);
else
result = usb_stor_huawei_feature_init(us);


\
 
 \ /
  Last update: 2013-02-07 09:01    [W:0.036 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site