lkml.org 
[lkml]   [2013]   [Dec]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] usb: phy-generic: Add GPIO based ChipSelect
On Saturday, December 07, 2013 04:24 AM, Felipe Balbi wrote:
> Hi,
>
> On Mon, Dec 02, 2013 at 03:05:17PM +0800, Chris Ruehl wrote:
>> @@ -231,27 +249,40 @@ static int usb_phy_gen_xceiv_probe(struct platform_device *pdev)
>> return -ENOMEM;
>>
>> nop->reset_active_low = true; /* default behaviour */
>> + nop->cs_active_low = true;
>>
>> if (dev->of_node) {
>> struct device_node *node = dev->of_node;
>> enum of_gpio_flags flags;
>> + enum of_gpio_flags csflags;
>>
>> if (of_property_read_u32(node, "clock-frequency",&clk_rate))
>> clk_rate = 0;
>>
>> needs_vcc = of_property_read_bool(node, "vcc-supply");
>> +
>> nop->gpio_reset = of_get_named_gpio_flags(node, "reset-gpios",
>> 0,&flags);
>> +
>
> two unrelated changes
>
>> if (nop->gpio_reset == -EPROBE_DEFER)
>> return -EPROBE_DEFER;
>>
>> nop->reset_active_low = flags& OF_GPIO_ACTIVE_LOW;
>>
>> + nop->gpio_chipselect = of_get_named_gpio_flags(node, "cs-gpios",
>> + 0,&csflags);
>> + if (gpio_is_valid(nop->gpio_chipselect))
>> + nop->cs_active_low = csflags& OF_GPIO_ACTIVE_LOW;
>> +
>> } else if (pdata) {
>> type = pdata->type;
>> clk_rate = pdata->clk_rate;
>> needs_vcc = pdata->needs_vcc;
>> nop->gpio_reset = pdata->gpio_reset;
>> + nop->gpio_chipselect = pdata->gpio_chipselect;
>> + } else {
>> + nop->gpio_reset = -1;
>
> This line is already going upstream, please remove it, i'll handle the
> conflict later.
>

Beause the rest of the patch set is not ready to make it in the upstream, I will
checkout latest linux-next and send the patch again as a single patch.

thanks
Chris


\
 
 \ /
  Last update: 2013-12-09 03:01    [W:0.157 / U:0.272 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site