Messages in this thread |  | | Date | Wed, 04 Dec 2013 15:16:21 +0800 | From | Chris Ruehl <> | Subject | Re: [PATCH 3/3] usb: phy-generic: Add ULPI VBUS support |
| |
On Tuesday, December 03, 2013 04:15 PM, Heikki Krogerus wrote: > On Mon, Dec 02, 2013 at 03:05:19PM +0800, Chris Ruehl wrote: >> @@ -154,6 +164,27 @@ int usb_phy_gen_create_phy(struct device *dev, struct usb_phy_gen_xceiv *nop, >> { >> int err; >> >> + if (nop->ulpi_vbus> 0) { >> + unsigned int flags = 0; >> + >> + if (nop->ulpi_vbus& 0x1) >> + flags |= ULPI_OTG_DRVVBUS; >> + if (nop->ulpi_vbus& 0x2) >> + flags |= ULPI_OTG_DRVVBUS_EXT; >> + if (nop->ulpi_vbus& 0x4) >> + flags |= ULPI_OTG_EXTVBUSIND; >> + if (nop->ulpi_vbus& 0x8) >> + flags |= ULPI_OTG_CHRGVBUS; >> + >> + nop->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, flags); >> + if (!nop->ulpi) { >> + dev_err(dev, "Failed create ULPI Phy\n"); >> + return -ENOMEM; >> + } >> + dev_dbg(dev, "Create ULPI Phy\n"); >> + nop->ulpi->io_priv = nop->viewport; >> + } > > This is so wrong. You are registering one kind of usb phy driver from > an other. Change drivers/usb/phy/ulpi.c to be a platform device. The > whole flag system in it is pretty horrid. While you are at it, change > that so it sets the values based on boolean flags from OF properties > or platform data. > > NAK for the whole set. > >
Heikki,
Thanks for your comments, even not much positive to me.. any how. My intention on the "horrid" path was to reduce kernel code where one of_read32 vs. four of_boolean. And mentioned logic is simple. But that's history.
On my way to find a solution for my board I'd look around and found using of phy-ulpi.c functions in phy-tegra-usb.c and don't mind to use them too.
I accept your NAK and will work on a patch to make phy-ulpi.c working as platform device.
Last question to you. What you don't like on the patch to support chip-select gpio of my patch-set.. I ask because you NAK the whole set. I really need the ChipSelect function to make my hardware work!
Chris
-- GTSYS Limited RFID Technology A01 24/F Gold King Industrial Bld 35-41 Tai Lin Pai Road, Kwai Chung, Hong Kong Fax (852) 8167 4060 - Tel (852) 3598 9488
Disclaimer: http://www.gtsys.com.hk/email/classified.html
|  |