lkml.org 
[lkml]   [2013]   [Dec]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5/6] regulator: pfuze100: use devm_regulator_register()
Date
Use devm_regulator_register() to make cleanup paths simpler,
and remove unnecessary remove().

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
---
drivers/regulator/pfuze100-regulator.c | 20 +++-----------------
1 file changed, 3 insertions(+), 17 deletions(-)

diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 032df37..50c1bf8 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -408,31 +408,18 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
config.driver_data = pfuze_chip;
config.of_node = match_of_node(i);

- pfuze_chip->regulators[i] = regulator_register(desc, &config);
+ pfuze_chip->regulators[i] =
+ devm_regulator_register(&client->dev, desc, &config);
if (IS_ERR(pfuze_chip->regulators[i])) {
dev_err(&client->dev, "register regulator%s failed\n",
pfuze100_regulators[i].desc.name);
- ret = PTR_ERR(pfuze_chip->regulators[i]);
- while (--i >= 0)
- regulator_unregister(pfuze_chip->regulators[i]);
- return ret;
+ return PTR_ERR(pfuze_chip->regulators[i]);
}
}

return 0;
}

-static int pfuze100_regulator_remove(struct i2c_client *client)
-{
- int i;
- struct pfuze_chip *pfuze_chip = i2c_get_clientdata(client);
-
- for (i = 0; i < PFUZE100_MAX_REGULATOR; i++)
- regulator_unregister(pfuze_chip->regulators[i]);
-
- return 0;
-}
-
static struct i2c_driver pfuze_driver = {
.id_table = pfuze_device_id,
.driver = {
@@ -441,7 +428,6 @@ static struct i2c_driver pfuze_driver = {
.of_match_table = pfuze_dt_ids,
},
.probe = pfuze100_regulator_probe,
- .remove = pfuze100_regulator_remove,
};
module_i2c_driver(pfuze_driver);

--
1.7.10.4



\
 
 \ /
  Last update: 2013-12-06 08:21    [W:0.269 / U:0.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site