[lkml]   [2013]   [Dec]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v4 2/3] regulator: tps6586x: add and use correct voltage table
On 12/03/2013 03:18 PM, Stefan Agner wrote:
> Depending on the regulator version, the voltage table might be
> different. Use version specific regulator tables in order to
> select correct voltage table. For the following regulator versions
> different voltage tables are now used:
> * TPS658623: Use correct voltage table for SM2 * TPS658643: New
> voltage table for SM2
> Both versions are in use on the Colibri T20 module. Make use of
> the correct tables by requesting the correct SM2 voltage of 1.8V.
> This change is not backward compatible since an old driver is not
> able to correctly set that value. The value 1.8V is out of range
> for the old driver and will refuse to probe the device. The
> regulator starts with default settings and the driver shows
> appropriate error messages.
> On Colibri T20, the old value used to work with TPS658623 since
> the driver applied a wrong voltage table too. However, the
> TPS658643 used on V1.2 devices uses yet another voltage table and
> those broke that pseudo-compatibility. The regulator driver now has
> the correct voltage table for both regulator versions and those the
> correct voltage can be used in the device tree.

Acked-by: Stephen Warren <>
(yes, taking this through the MFD tree with patch 1/3 makes sense)

 \ /
  Last update: 2013-12-05 18:21    [W:0.111 / U:1.292 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site