lkml.org 
[lkml]   [2013]   [Dec]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 9/9] mtd: nand: davinci: don't request AEMIF address range
On Thu, Dec 05, 2013 at 07:25:57PM +0200, Ivan Khoronzhuk wrote:
> The TI AEMIF driver registers are used to setup timings for each chip
> select. The same registers range is used to setup NAND settings.
> The AEMIF and NAND drivers not use the same registers in this range.
>
> In case with TI AEMIF driver, the memory address range is requested
> already by AEMIF, so we cannot request it twice, just ioremap.
>
> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
> Reviewed-by: Taras Kondratiuk <taras@ti.com>
> Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
> ---
> drivers/mtd/nand/davinci_nand.c | 8 +++++---
> 1 file changed, 5 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
> index f7b21b8..0cd4dbc 100644
> --- a/drivers/mtd/nand/davinci_nand.c
> +++ b/drivers/mtd/nand/davinci_nand.c
> @@ -636,9 +636,11 @@ static int __init nand_davinci_probe(struct platform_device *pdev)
> if (IS_ERR(vaddr))
> return PTR_ERR(vaddr);
>
> - base = devm_ioremap_resource(&pdev->dev, res2);
> - if (IS_ERR(base))
> - return PTR_ERR(base);
> + base = devm_ioremap(&pdev->dev, res2->start, resource_size(res2));

Since it's important that we don't re-introduce the "request resource"
boilerplate later, can you add a comment describing the situation?

> + if (!base) {
> + dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res2);
> + return -EADDRNOTAVAIL;
> + }
>
> info->dev = &pdev->dev;
> info->base = base;

Thanks,
Brian


\
 
 \ /
  Last update: 2013-12-17 10:01    [W:0.870 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site